Component Names & Functions, Front Panel | JVC BD-X200U specification

Introduction
Details Regarding Discs (continued)
DVD Data Configuration	Region Codes

Component Names & Functions

Front Panel

Generally speaking, the content recorded on a DVD is separated

into large units referred to as “titles”. A unique number called a

“title number” is assigned to each of these titles, and as a result,

any title can be immediately accessed using its title number. In

addition, each title can be divided into smaller units referred to

as “chapters”. Similarly, a unique number called a “chapter

number” is assigned to each of these chapters, and this allows

any chapter to be immediately accessed using its chapter

number.

Each recording made to a DVD-R or DVD-RW (video mode) is

stored as a single title. In this, each pressing of the STOP button

to leave Recording mode constitutes a different recording. (This

action is also referred to as “title closing”.)

One of six numbers referred to as “region codes” is assigned to DVD content to control the global regions in which this content may be viewed. If a DVD’s region code does not correspond to the region code of the DVD player being used, it will not be possible to play the disc.

●This DVD recorder assigns the region code “ALL” to the discs that it records.

●It will not be possible to play discs to which region codes have been assigned.

	OPERATE
1
	AUDIO
5	CH1
5	CH2
	PHONES
8

DVD RECORDER BD-X200

TITLECHAPTER

DOLBY DIGITAL

LPCM MPEG

REV

STOP

PLAY

FWD

PAUSE

REC

BUSY

OPEN/CLOSE

OPTION DV Y/C LINE

SET UP

TOP	SET
MENU	MENU

3 4 7

Whenever the PAUSE button is pressed to pause recording, a
chapter mark is inserted into the current title. It is also possible
to insert chapter marks to partition titles at the desired points by
pressing the REC button while recording. In addition, your BD-
X200 can also be used to automatically insert chapter marks at
regular intervals. (CHAPTER CREATION menu settings will be
required for this function.)
	DVD-R or DVD-RW
Title 1			Title 2
Chapter 1 Chapter 2	Chapter 3	Chapter 1	Chapter 2

●Before a title is closed, it will be possible to modify the style used for chapter menu display, to change the thumbnails used, and to input thumbnail names.

●Before a disc is finalized, it will be possible to modify the style

used for the title menu and to input title names.

Screen Sizes

This DVD recorder is capable of recording video content for wide- screen TVs (i.e., with a 16:9 aspect ratio). In addition, signals for normal content with a 4:3 aspect ratio, for squeezed content (i.e., where the left and right are compressed), and for letterbox content (i.e., where the top and bottom of the screen are black) can be recorded as is.

●Thumbnail creation method for use in the title/chapter menu during wide-signal input can be selected in THUMBNAIL

FORM of the RECORDER (2/2) menu screen. (☞ Page 81)

1OPERATE button and indicator

●This button is used to turn on the DVD recorder and to make it ready for use. When pressed a second time, this button turns off the DVD recorder.

●The indicator’s lighting condition depends on the condition

of the DVD recorder and can be one of the following.
Lit in green		:	The DVD recorder’s power is on.
Lit in red		:	The DVD recorder’s power is off.
Flashing in red		:	An error has occurred.

	Notes

●The OPERATE button will have no effect if pressed while the DVD recorder is in either Recording or Recording Pause mode. This is also the case when performing finalizing, erasing, or dubbing.

●The DVD recorder continues to use a small amount of power even after it has been turned off using the OPERATE button. If it will not be used for an extended period of time, please disconnect the AC adaptor to avoid wasting electricity.

●Do not disconnect the DC cord or power cord when in Operate On mode as this can result in the DVD recorder being damaged.

●Malfunction may occur when switching to OPERATE ON while pressing a key on a connected USB keyboard.

2Disc tray The purpose of the disc tray is to hold DVDs. This tray opens automatically when the OPEN/CLOSE button is pressed. In addition, the OPEN/CLOSE button can be pressed again to close the tray. Notes

●Do not push the disc tray as it is opening or closing.

●Do not place objects other than discs on the disc tray.

●Do not press down on the disc tray

3BUSY indicator This indicator flashes when the DVD recorder is in Recording Pause mode or when it is performing time-consuming operations such as title closing, finalizing, and erasing. None of the DVD recorder’s buttons will have any effect if pressed while the BUSY indicator is flashing.

4OPEN/CLOSE button and indicator This button is used to open and close the disc tray. In addition, the OPEN/CLOSE indicator is lit up while the disc tray is opening, and also when it is open.

Note The OPEN/CLOSE button will have no effect if pressed while the DVD recorder is in either Recording or Recording Pause mode. This is also the case when performing finalizing, erasing, or dubbing.

5Audio level indicator
These meters are used to indicate the current level of audio
on Channel 1 and Channel 2.
Specifically, the audio level meters indicate the audio recording
levels when the DVD recorder is in Recording mode, and the
audio playback levels when it is in Playback mode.
(Adjustment of the audio recording levels: ☞ Page 35.)
6LCD display
The LCD display is used to present important information.
During recording or playback, for example, the title, chapter
number, and elapsed time are indicated on the LCD display.
(☞ Page 14 for more details.)
7Video input indicators
OPTION indicator
This indicator is lit up or flashes when	INPUT SELECT
from the INPUT SELECT MENU screen	has been set to
OPTION. (This setting cannot be carried out using the DVD
recorder alone.)
DV indicator
This indicator is lit up or flashes when	INPUT SELECT
from the INPUT SELECT MENU screen	has been set to
DV. Specifically, the indicator is lit up when an input signal
is present, and it flashes when no signal is present.
Y/C indicator
This indicator is lit up or flashes when	INPUT SELECT
from the INPUT SELECT MENU screen	has been set to
Y/C. Specifically, the indicator is lit up when an input signal
is present, and it flashes when no signal is present.
LINE indicator
This indicator is lit up or flashes when INPUT SELECT
from the INPUT SELECT MENU screen has been set to
LINE. Specifically, the indicator is lit up when an input signal
is present, and it flashes when no signal is present.
8Phones jack and volume adjuster
The phones jack allows headphones to be connected to the
DVD recorder for monitoring of audio levels; in addition, the
headphone volume can be adjusted using the volume adjuster.
Note that this adjuster has no effect on the actual recording
levels.

Introduction

Details Regarding Discs (continued)

DVD Data Configuration

Region Codes