Component Video / Progressive Scan connection
If your television is a
Connect the COMPONENT VIDEO OUT/P/SCAN jacks on the Recorder to the corresponding in jacks on the TV using an optional Y Pb Pr cable (C).
Notes:
•Set Progressive Scan option to [ON] in the setup menu, see page 20.
•Progressive Scan does not work with the RF, Audio/Video or
•If your TV does not accept the Progressive Scan format, the picture may appear scrambled or no picture at all.
•When you use Component Video signal, set the Progressive Scan to [OFF] on the setup menu.
Audio connection
Connect the Left and Right AUDIO OUT jacks on the Recorder to the audio left/right in jacks on the TV using the supplied audio cables (A).
Connection to an Amplifier
Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II/Pro Logic
Connect the Left and Right AUDIO OUT jacks on the Recorder to the audio left and right in jacks on your amplifier, receiver, or stereo system using the audio cables (A) supplied.
Connecting to an amplifier equipped with two chan- nel digital stereo (PCM) or to an Audio/Video receiv- er equipped with a
1.Connect one of the Recorder’s DIGITAL AUDIO OUT jacks ( OPTICAL O, COAXIAL X) to the cor- responding in jack on your amplifier. Use an optional digital (OPTICAL O, COAXIAL X) audio cable.
2.You will need to activate the Recorder ’s digital output. (See [Audio Settings] on page 22).
Digital Multi-channel sound
A digital
Caution:
Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is selected.
Notes:
•If the audio format of the digital output does not match the capabilities of your receiver, the receiver will pro- duce a strong, distorted sound or no sound at all.
•Six Channel Digital Surround Sound via digital connec- tion can only be obtained if your receiver is equipped with a Digital
•To see the audio format of the current DVD in the on- screen display, press AUDIO.
•This Recorder does not perform internal (2 channel) decoding of a DTS sound track. To enjoy DTS multi channel surround, you must connect this Recorder to a DTS compatible receiver via one of this Recorder’s digi- tal audio outputs.
Rear of the recorder
A | X | O |
L | R | COAXIAL | OPTICAL |
AUDIO INPUT | DIGITAL INPUT | DIGITAL INPUT |
Amplifier (Receiver)
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the
DTS and DTS Digital Out are trademarks of Digital Theater Systems, Inc.
16