Timer Recording Troubleshooting
Even though the timer is set, the recorder will not record when:
•There is no disc loaded.
•A
•[Disc Protect] is set to [ON] in the Disc menu (see page 26).
•There are already 99 titles
You cannot enter a timer program when:
•A recording is already underway.
•The time you’re trying to set has already passed.
•There are already 8 timer programs set.
If two or more timer programs overlap:
•The earlier program takes priority.
•When the earlier program finishes, the later program starts.
•If two programs are set to start at exactly the same time, the program entered first takes pri- ority.
If the disc is damaged, the recording may not com- plete successfully. In this case even though the
Check field shows [Rec. OK], it may not be.
Recording from External Components
You can record from an external component, such as a camcorder or VCR, connected to any of the Recorder’s external inputs.
1.Make sure that the component you want to record from is connected properly to the Recorder. See page 17.
2.Press INPUT repeatedly to select the external input to record from.
•AV1: Audio/Video Input mounted on back panel.
•AV2: Audio/Video Input mounted on front panel.
•DV: DV Input mounted on front panel.
3.Load a recordable disc or tape.
4.Set a recording mode as necessary by pressing REC MODE repeatedly (HQ, SQ, LQ, EQ).
5.Press z REC once to start recording.
The REC indicator lights in the display window.
6.Press STOP (x) to stop recording.
Notes:
•Check that the Audio In settings [DV Recording Audio] are as you want them. See page 24.
•If your source is
•Recording continues until you press STOP (x) or the disc is full.
•To record for a fixed length of time, see Instant Timer Recording on page 38.
40