LG Electronics DRT389H manual Restrictions on copying, About the Symbol Display Regional Codes

Page 6

DR386M-P.BGBRLLK_ENG 6/13/08 9:59 AM Page 6

Notes on discs

Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit.

Do not attach any seal or label to either side (the labeled side or the record- ed side) of a disc.

Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). Doing so may result in malfunctions.

Depending on the recording software & the finalization, some recorded discs (CD-R/RW or DVD±R/RW) may not be playable.

DVD-R/RW, DVD+R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the Unit’s lens.

If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.)

This unit requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are auto- matically set to these standards. There are many different types of record- able disc formats (including CD-R containing MP3 or WMA files) and these require certain pre-existing conditions (see above) to ensure compatible playback.

Customers should note that permission is required in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copy- right owner.

Restrictions on copying

Some video materials are copy-once protected: Such material cannot be copied to DVD. You can identify copy-once protected material during playback by dis- playing disc information on-screen.

NTSC format signals from the analog or the DV inputs are not recorded cor- rectly with this unit.

Video signals in SECAM format (from the built-in TV tuner or from the ana- log inputs) are recorded in PAL format.

About the Symbol Display

” may appear on your TV display during operation and indicate that the function explained in this owner’s manual is not available on that specific media.

Regional Codes

This unit has a regional code printed on the rear of the unit. This unit can play only DVD discs labeled same as the rear of the unit or “ALL”.

Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number must match your unit’s regional code or the disc cannot play.

If you try to play a DVD with a different regional code from the unit, the mes- sage “Incorrect region code. Can’t play back” appears on the TV screen.

Remote Control Operation

Point the Remote Control at the remote sensor and press the buttons.

Remote Control Battery Installation

Remove the battery cover on the rear of the Remote Control, and insert R03 (size AAA) battery with 3 and # matched correctly.

Setting up the remote to control your TV

You can operate your TV with the supplied remote control.

If your TV is listed in the table below, set the appropriate manufacturer code.

While holding down TV POWER button, and press the manufacturer code for your TV with the numerical buttons (see the table below). Release the TV POWER button to complete setting.

Manufacturer

Code Number

LG / GoldStar

1 (Default), 2

 

 

Zenith

1, 3, 4

 

 

Samsung

6, 7

 

 

Sony

8, 9

 

 

Hitachi

4

Depending on your TV, some or all buttons may not function on the TV, even after entering the correct manufacturer code. When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the appropriate code number again.

6

Image 6
Contents DRT389H Disposal of your old appliance Copyrights Open source software noticeContents Before you start Recordable and Playable discsPlayable discs Setting up the remote to control your TV About the Symbol Display Regional CodesRemote Control Operation Restrictions on copyingRemote control V / V left/right/up/downMain Unit Hooking up the unit Antenna connection to your TVAntenna Antenna Digital Analog And/or Hooking up the unit more you can do General about connectionComponent connection Video connection Digital audio connectionAbout Hdmi What is SIMPLINK?Hdmi connection RecorderConnecting a PAY-TV/Canal Plus Decoder Connecting to the AV2 Decoder jackUsing USB Flash Drive more you can do Operating USB Flash DriveAdjust the programmed channels Auto setupAuto setup more you can do Editing a channel Analog channel onlyUsing the Home Menu Setting a favorite programEasy Menu Adjust the Setup settingsUsing the Home Menu more you can do RecordAdjust the Setup settings more you can do Adjust the general settingsAdjust the language settings Adjust the audio settings Adjust the lock settings Adjust the recording settingsAdjust the disc settings RAMAdjust the network settings Displaying disc information Displaying disc Information more you can doChanging TV program Switching the program listDisplaying information while watching TV Changing TV program with program listSwitching the EPG menu Using the digital EPGUsing the digital EPG more you can do About the digital EPGPlay a disc Play a disc more you can doFast forward or fast reverse DVD ALL ACD DivX Pause a playbackFrame-by-Frame playback DVD ALL Hearing a different audio DVD ALL DivXPlaying DivX movie files Playing a DivX movie files more you can doListening to a music Listening to a music more you can doViewing a photo Viewing a photo more you can doRecording Instant timer recordingSetting a timer record Recording more you can doEditing a title Editing a title more you can doDeleting a title or chapter Before editingAdding chapter markers -RWVR+RW +R RAM Making a new Playlist -RWVRRAMProtect a title -RWVR+RW +R RAM Hiding a chapter or title +RW +RDividing a title +RW Deleting a part -RWVRRAMNaming a title Using the Disc menuViewing Title List menu displayed on another unit +RW +R Overwriting +RWLanguage Codes Area CodesTroubleshooting GeneralPlayback Resetting the unit RecordingInputs SpecificationsAccessories OutputsGuarantee Technology with the human touch