Initial Setup Wizard
After the POWER is pressed for the first time to turn on the unit, the Initial Setup Wizard function sets the Language, Channels and Clock
1.Use v / V to select a language for the Setup menu and information display then press ENTER.
2.Check your antenna connections. Press B to move next step.
3.Select the [Tuning Band] option then press B . TV is for
4. Press ENTER to begin the channel search.
You can skip the analog channel scanning by pressing B.
5.Enter the necessary information for date, year and time.
b / B (left/right): Moves the cursor to the previous or next column.
v / V (up/down): Changes the setting at the current cursor position.
Press ENTER to confirm your setting.
6. Press ENTER to exit the menu.
Note:
You can reset the Initial Setup Wizard from the [Factory Set] in the setup menu. (see page 21).
HOOKUP AND SETTINGS
19