LG Electronics DR787T Playing while you are recording RAM, Timer Recording Troubleshooting

Timer Recording Troubleshooting

Even though the timer is set, the recorder will not record when:

•There is no disc loaded.

•A non-recordable disc is loaded.

•Disc Protect is set to [ON] in the Disc menu (see page 26).

•There are already 99 titles (DVD-RW, DVD-R, DVD-RAM), 49 titles (DVD+RW, DVD+R(DL)) recorded on the disc.

You cannot enter a timer program when:

•A recording is already underway.

•The time you’re trying to set has already passed.

•There are already 16 timer programs set.

If two or more timer programs overlap:

•The earlier program takes priority.

•When the earlier program finishes, the later program starts.

•If two programs are set to start at exactly the same time, the program entered first takes priority.

If the disc is damaged, the recording may not complete successfully. In this case even though the Check field shows [Rec. OK], it may not be.

To record one TV program while watching another

1.Press TV/DVD to select the TV mode during recording. The TV indicator appears.

2.Using the TV, select the channel to be viewed.

Playing while you are recording RAM

You can start play from the beginning of the title while continuing to record it.

While recording (in DVD mode)

1.Press PLAY (N).

Start play of the title you are recording.

2.Press STOP (x) to return to the current recording screen.

OR

1.Press TIMESHIFT.

The PIP(Picture-In-Picture) window appears on the screen as shown below. What is currently being recorded appears as a PIP and you will hear the playback audio.

•You can switch between PIP window and Main win- dow screen by pressing TIMESHIFT.

2.Press STOP (x) to return to the current recording screen.

Notes:

•Play cannot be started until at least 30 seconds after recording starts. (MLP mode: after 1 minute)

•This function can operate the DVD-RAM disc only.

40