Before Operation (Continued)
PANO (PANORAMA)
This control extends the front stereo image to include the surround speakers for an exciting “wraparound” effect with
C WIDT (Center Width)
This control allows
DIMEN (DIMENSION)
This control allows the user to gradually adjust the sound field either towards the front or the rear. This can be useful to help achieve the desired balance from all the speakers with certain recordings that may contain either too much or too little spatial effect. Step “0” is the recommended setting, which has no effect on the sound. Steps 1, 2, and 3 gradually move the sound for- ward, and steps
Sound Level
You can set the sound level of the desired channel.
1 | Press LEVEL on the remote | control. | ||
The level indicator will appear in the Display Window. | ||||
2 | Press | / | to select a desired speaker to set. | |
Each time you press the / | button, it is changed | |||
| in the following order; |
| ||
| FL (Front Left) → C (Center) → FR (Front Right) → | |||
| SR (Surround Right) → SL (Surround Left) → | |||
| SW (Subwoofer) → FL (Front Left) ... | |||
| Press | / | to adjust the sound level of the |
3 selected channel.
4 Repeat step
5 If setting is complete, press LEVEL.
Test Tone |
|
This function allows you to can easily adjust the sound |
|
balance of the speakers from the listener's position. |
|
1 TONE.Select the test tone mode by pressing TEST | HOOKUP |
SR (Surround Right) → SL (Surround Left) → | |
A hiss noise comes out for 2 seconds from each |
|
speakers in the following order; |
|
FL (Front Left) → C (Center) → FR (Front Right) → |
|
SW (Subwoofer) → FL (Front Left) ... |
|
You can adjust the sound level while the test |
|
2 tone is operating. First press LEVEL then press |
|
the / buttons, so that the sound level from |
|
all the speakers is same from the listener’s |
|
position. |
|
•During the test tone, if you adjust the sound level, it will be paused in the current speaker channel.
3 If setting is complete, press TEST TONE.
XTS (Excellent True Sound)
You can enjoy the vivid stereophonic sound of the digital original source without any signal distortion.
Each time you press XTS during 2 channel mode, the setting changes in the following order.
XTS- 1 → XTS- 2 → XTS- 3 → XTS OFF ...
Tips:
XTS- 1: When playing the movie with the weak bass sound relatively to the general music, it enforces the sense of sound at woofer
for you to satisfy with.
XTS- 2: In the mode of 2 CH BYPASS, It creates the high display effect by playing the sound source via the rear speakers same as the front speakers.
XTS- 3: You can operate both XTS- 1 and XTS- 2 simultaneously and it can complement the relative degrading of the sound pitch of the woofer at the XTS- 2 mode.
ote
The XTS- 2 mode is temporarily disabled when changing from 2.1 CH to 5.1 CH and it is enabled when changing it to 2.1 CH.
25