VCR Mode Tape Playback
Preparation
Before using the Remote Control, press the VCR but- ton to select the device to be operated.
Turn the TV on and select the video input source con- nected to the Recorder Combi Receiver.
Audio system: Turn the audio system on and select the input source connected to the Recorder Combi Receiver.
Normal Playback VHS
1 | Insert a prerecorded video cassette. | |
The | indicator will light and the Recorder Combi | |
Receiver will
Make sure that the 
indicator in the display window is not on. If it is, press POWER once.
If a tape without a safety tab is inserted, the Recorder Combi Receiver will start playback automatically.
2 Press PLAY (B) once.
PLAY icon appears on the TV screen.
It is not necessary to select the tape speed for play- back. It will be automatically selected by the Recorder Combi Receiver.
In playback, the TV/VCR selector switches to VCR mode automatically.
3 Press STOP (x) to stop playback. STOP icon appears on the TV screen.
If the tape reaches the end before STOP (x) is pressed, the Recorder Combi Receiver will automatically stop, rewind and eject the tape, and turn itself off.
Tracking Control VHS
Auto Tracking
The automatic tracking function adjusts the picture to remove snow or streaks.
The AUTO TRACKING function works in the following cases:
A tape is played back for the first time. Tape speed (SP, LP, SLP) changes.
Streaks or snow appear because of scratches on the tape.
Manual Tracking
If noise appears on the screen during playback, press either
In case of vertical jitter, adjust these controls very carefully. Tracking is automatically reset to normal when the tape is ejected or the power cord is unplugged for more than 3 seconds.
Special Effect Playback VHS
Special effects playback notes
Horizontal lines (noise bars) will appear on the TV screen. This is normal.
The audio is automatically muted during special effect modes, so there is no sound during search.
During the
Search
This function lets you visually search forward and back- ward for a desired scene on your tape.
1Press SCAN (m) or SCAN (M) during playback. The Recorder Combi Receiver will be activated in the SEARCH mode.
If the Recorder Combi Receiver is left in the SEARCH mode for more than 3 minutes, the Recorder Combi Receiver will automatically enter the PLAY mode, to pro- tect the tape and video heads.
2To return to playback, press PLAY (B).
Still Picture and Frame-by-Frame Playback
1Press PAUSE(X) during playback.
A still picture appears on the TV screen.
If a still picture vibrates vertically, stabilize it by using
If the Recorder Combi Receiver is left in the STILL mode for more than 5 minutes, the Recorder Combi Receiver will automatically enter the STOP mode to protect the tape and video heads.
2Press PAUSE(X) repeatedly to advance the
video picture one frame at a time while viewing a still picture.
3To return to playback, press PLAY (B).
Slow Motion
1While in still mode, press SCAN (M).
The tape will be played back at a speed 1/19 times slower than the normal speed.
During slow playback, use
If slow motion mode continues for more than 3 minutes, the Recorder Combi Receiver will automatically change to normal play mode.
2To return to playback, press PLAY (B).
Counter Memory Function
This is useful if there is a section of tape you want to view immediately after recording or if you want to return to the same point several times.
1Begin recording or playing a tape.
2Press DISPLAY repeatedly to display the
3At the point you want to locate later, reset the real- time counter to 0:00:00 by pressing CLEAR.
Continue to play or record.
4Press STOP when recording or playback finishes.
5Press RETURN (O).
The tape automatically stops when the tape counter returns to about “0:00:00”.
PLAYBACK
49