If a menu screen is displayed DVD VCD
The menu screen may be displayed first after loading a DVD or Video CD which contains a menu.
DVD
Use the b / B / v / V buttons to select the title/chapter you want to view, then press ENTER to start playback.
Press TITLE or MENU/LIST to return to the menu screen.
VCD
Use the number buttons to select the track you want to view.
Press RETURN (O) to return to the menu screen. Menu setting and the exact operating procedures for using the menu may differ depending on the disc. Follow the instructions on the each menu screen. You may also set PBC to [OFF] under Setup menu (see page 23).
Moving to another TITLE -RWVR -RWVideo
RAM +RW -R +R DVD DivX
When a disc has more than one title, you can move to another title as follows:
Press DISPLAY twice during playback then use v /
Vto select the title icon. Then, press the appropriate numbered button
Time Search -RWVR -RWVideo RAM +RW
-R +R DVD DivX
To start playing at any chosen time on the disc:
1.Press DISPLAY twice during playback. The time search box shows the elapsed playing time.
2.Press v / V to select the time clock icon and
3.Input the required start time in hours, minutes, and seconds from left to right.
If you enter the wrong numbers, press b / B to move the under bar (_) to the wrong number. Then enter the correct numbers.
4.Press ENTER to confirm. Playback starts from the selected time.
Marker Search 
Video | RAM +RW | ||
VR |
|
| |
DVD | VCD |
|
|
To enter a Marker
You can start playback from up to six memorized points. To enter a marker, press MARKER at the desired point on the disc. The Marker icon appears on the TV screen briefly. Repeat to enter up to six markers.
To Recall or Clear a Marked Scene
1.During disc playback, press SEARCH. The marker search menu appears on the screen.
2.Use b / B / v / V to select a marked scene that you want to recall or clear.
3.Press ENTER and playback starts from the marked scene. Or, press CLEAR and the marked scene is erased from the marker search menu.
Camera Angle DVD
If the disc contains scenes recorded at different camera angles, you can change to a different camera angle during playback.
1.Press DISPLAY during playback. The
2.Use v / V to select the Angle icon in the On- Screen Display.
3.Use b / B to select a desired angle.
The number of the current angle appears on the TV screen.
Tip:
The ANGLE indicator will blink on the TV screen at scenes recorded at different angles to indicate that angle switching is possible.
Playback
27