LG Electronics DR1F9H owner manual Finding Locations on a Disc VCD, Last Condition Memory DVD

3D Surround -RWVR-RWVideoRAM +RW

-R +R DVD VCD DivX

This unit can produce a 3D Surround effect, which simulates multi-channel audio playback from two conventional stereo speakers, instead of the five or more speakers normally required to listen to multi- channel audio from a home theater system.

1.Press DISPLAY during playback. The On-Screen Display appears on the TV screen.

2.Use v / V to select the Sound icon in the On- Screen Display.

3.Use b / B to select “3D SUR”.

To turn off the 3D Surround effect, select “NORMAL”.

Finding Locations on a Disc VCD

You can directly access any point on a video CD using this function. Use this function only while a video CD is playing. Playback jumps to the point specified.

1.Press SEARCH during playback.

The progress bar appears on the TV screen.

2.Use b / B to find a start position for playback.

3.Press ENTER to confirm the selected position. Playback starts from the selected position.

Note:

This function works only when no marker is memorized.

Last Condition Memory DVD

This recorder memorizes the user settings for the last disc that you have viewed. Settings remain in memory even if you remove the disc from the recorder or switch off the recorder. If you load a disc that had its settings memorized, the latest stop position is automatically recalled.

Notes:

–Settings are stored in memory for use any time.

–This recorder does not memorize settings of a disc if you switch off the recorder before commencing to play it.

PIP (Picture in Picture) -RWVR-RWVideo

RAM +RW -R +R DVD VCD

This function enables you to view the stored stations in sub picture during playback.

On and off

Press PIP to switch on the sub picture, press this button again to switch it off.

Input mode selection for sub picture

Press AV/INPUT to select the input mode for the sub picture. Each time this button is pressed, each input mode for the sub picture is displayed as shown below.

Tuner → AV1 → AV2

Program selection for sub picture

Use PR/CH (+/-) to change the program when sub picture’s input is set to tuner. The selected program number is displayed on the TV screen. You can view the selected program by pressing STOP (x).

Sub picture position change

Press b / B repeatedly until desired position is achieved. The sub picture moves clockwise or counterclockwise.

28