Go-Video R6530 manual Remote Control, Prog. Scan

R6530 DVD Recorder

Remote Control

1On/Standby

Press to switch the DVD Recorder between On and Standby (low power) modes. The Power button on the front panel must be pressed in for this button to work.

2Prog. Scan

Press to switch the video output between Progressive Scan and Interlace Scan. Only use when the DVD Recorder is connected to a Progressive Scan televi- sion with the Component Video Output.

3Setup

While a disc is in Stop mode, press to display the DVD Recorder Setup menu.

4Quality

While in Live mode, press repeatedly to set the Record Quality to HQ, SP, LP, EP, or SLP.

5Record

Press to start recording from the currently selected input source. Also use as a short- cut to jump to Live mode while in Disc mode.

6Input

While in Live mode, press repeatedly to select among external audio/video input sources (Line 1, Line 1-S, Line 2, Line 2- S, Ch ###).

7Play /Enter

Press to start playback. Also press to con- firm menu settings. Also use as a shortcut to jump to Disc mode while in Live mode.

8Arrow buttons

Press to navigate on-screen menus.

10

9Return

Press to return to the previous menu.

10Next

Press to skip to the next Chapter or Track.

11Prev

Press to skip to the previous Chapter or Track.

12Zoom

Press to zoom in at various levels of magnification during DVD playback.

13Display

Press to display current disc status.

14Disc Menu

Press to view the DVD disc menu.

150-9

Use to enter numeric data in on-screen menus. Press Play /Enter to confirm.

16Program

Press to program a custom Track play- back order (CD and MP3 discs only).

17Audio

Press to select among available audio Tracks/formats during DVD playback.

18Subtitle

Press to select among available subtitle languages during DVD playback.

19Open/Close

Press to open and close the DVD disc tray.

20Channel +/-

Press to select the next or previous chan- nel in your channel list.