FOCUS Enhancements DR-HD100 manual Serial Number, FCC Class a

Page 5

Regulations and Safety

Focus Enhancements, Inc.

1370 Dell Avenue

Campbell, CA. 95008

Model Number: ProHD DR-HD100

Date of Manufacture:

Reference the Serial Number label attached to the unit.

Serial Number

The serial number for this equipment is located on the back of the unit. Please write this serial number on the enclosed warranty card and keep it in a secure area.

FCC Class A

This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors.

This equipment has been tested and found to comply within the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, correct the interference by one or more of the following:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment to an outlet on a circuit different from that used by the receiver.

•Consult the dealer or an experienced radio/TV technician for help.

ProHD DR-HD100 Portable DTE Recorder

iii

Image 5

Contents ProHD Page Legal Notices Contacting Focus Enhancements FCC Class a Serial NumberDocumentation Read, Retain, and Follow Instructions Symbol Used In the ProHD DR-HD100 UnitSymbols Used in This Documentation On / OFF Switch in Stand-By Position Electrical Precautions Do Not Expose to MoisturePower Sources Do Not Overload Power OutletsOutdoor Antenna Grounding Lightning and Power SurgesGrounding or Polarization Optical Precaution Power LinesMaintenance and Moving Cleaning ServicingSafety Check Accessories and Replacement PartsOperating Environment Location VentilationTable of Contents DR-HD100 Functions DR-HD100 Using with a ComputerUpgrade Errors Technical Specifications LCD Display Symbols and TextPage Page DTE Eliminates Pre-edit Processing IntroductionMissing or Damaged Components UnpackingDR-HD100 offers the following features FeaturesDR-HD100 Features Compact, Lightweight, Rugged Design Quickstart Front Panel Controls Physical Description and Basic ControlsLCD Display Function buttons A, B, CPower on button provides two functions Power On ButtonNavigation Buttons Transport Control ButtonsSome HDV Camcorders Require a Moment to Synchronize Search Modes and HD Recorder ModeFast Forward and Reverse Fast Forward and Reverse Search Compatible CamcordersBack Index WW Using Back Index with Short ClipsFloating Charge Mode Charging almost completed Top panel contains the following connectors and LEDsFast Charge Mode Maximum charging rate Power on Power On but there is no activityRemote Control, Serial Connector Computer FireWire ConnectorCamera FireWire Connector Channel AudioSide Panel Rear PanelRear panel contains the following important items Side panel contains cooling vents as illustrated belowBottom Panel Power SpeakerDR-HD100 Menu System Only appears for several seconds upon power upContains the following selections Provides lists to select play material fromContains the following disk and clip functions EXT CTL File Contains the following hard drive selectionsContains the following recording functions When selecting HD Recorder the format displayed isConnecting the DR-HD100 to AC Power Powering the DR-HD100Removing a Battery Installing / Removing the Battery PackInstalling a Battery Using FireWire to Charge DR-HD100 Charging the BatteryGY-HD100/101 FireWire Connector Connecting a DR-HD100 to a DV/HD CamcorderDR-HD100 Supplied with 6-pin to 6-pin FireWire Cable Record and Playback with the DR-HD100 Power On the DR-HD100To power OFF Hold down for 3-5 seconds Select HDD Recorder Mode DV24p and PAL 25p Modes Select a DV/HD File FormatDV Formats RAW DV AVI TYPE1 AVI TYPE2 Canopus AVI Set Time and Date SetupLcdlight on SET DateSET Time Record With the DR-HD100 Series to enable control of the DR-HD100There are four modes of recording with the DR-HD100 Control with the DR-HD100 transport buttonsShort Delay When Switching from VTR to Camera Mode Troubleshooting Counter Not IncrementingVerify Record Mode Matches Source Video Content and Format Creating a New File without Dropping Frames Manual RecordingControl Local JVC GY-HD Syncro Slave AV / C Important GY-HD100 SettingSeries Record and Split Slave Control Modes GY-HD100 OTHER→BACK Spacehdv SettingSyncro Slave Recording Timecode in the File ExternalControl JVC GY-HD Syncro Slave AV / C -EXTERNAL Function buttonsPlayback on the DR-HD100 Recording for Unsupported NLE DR-HD100 Using with a ComputerFor More Information Initial SetupMounting the DR-HD100 in Windows Use this procedure for Windows XP, 2000, 98SE and MEDR-HD100 Video Clips in Reel Folder DR-HD100 and FAT HD Resolution and FramesUsing Avid OMF Clips Required for DV mode only Organize OMF Function If Drive Does Not Appear Locate and select the DR-HD100 under Media DrivesTo do dismount the DR-HD100 Dismounting the DR-HD100 WindowsMounting the DR-HD100 Macintosh Before Connecting DR-HD100 to a ComputerTo dismount the DR-HD100 from a Mac Dismounting the DR-HD100 MacintoshMounting DR-HD100 to a Camcorder Mounting HardwareClipping to a Belt Belt Mount Clip Front ViewJump to Home display Using Select Button Navigation Tip Jump to Top of Display Using the Left ButtonWelcome Screen General Screen InformationReel Disp Home ScreenCounter Field Data Type Number Data Description Disp display Information FieldsDR-HD100 System Information Screens Power RemainingPress OK to clear the screen and return to the last screen DV Ntsc or PAL and HDRecord Normal Retro Disk Retro Cache Loop Record Record ScreensRetro Cache Back Retro Cache Record ModeNormal Record Retro Time Retro Disk Record ModeRetro Disk HDD Avail Another Method to Capture Single Frames Loop RecordSaving Loop Record Clips Time Lapse Time Lapse Record DV modes onlySwitching Between Recorder Modes DV and HD HDD Mode ScreenPower-cycle After Changing Recorder Modes This screen displays the following itemsUSE EXT DR-HD Master DR-HD100 Slave DR-HD100 Setting Up Master and Slave DR-HD100DV Formats Format ScreenDV Formats RAW DV AVI Type 1 AVI Type 2 Canopus AVI DV formats includeHD Formats Check regularly for updatesHD Format Screen EXT CTL Pause EXT CTL Frame EXT CTL File Setup ScreensTime DateVersion Alarm On, OffLCD Light On, Off, Auto VersionEXT CTL OFF, Pause, Frame, File Stop Frame, Gray, No videoDisplays the first frame of the clip Displays a black frameTC SET and UB SET Can Be Set at the Same Time When the DR-HD100 powers up in TC Regen mode, itFollowing are timecode TC functions TC SET TC SETUB SET UB SETTC DROP, NON-DROP Ntsc only Enables the drop-frame functionSET Contrast Value Back Use with TC Free RUN or TC RegenFunctions FA JVC GY-HD FA Sync FA AV / C FA External Functions ScreenMenu Functions ListFB Blank Blank Assigning Clips to ReelsStop Counter ReelUtilities available are Utilities ScreenOrganize Pinn Organize ReelOrganize OMF YES Back Delete ClipUse this item to delete a selected clip Use Delete Clip SparinglyThis selection formats the disk as follows Format DiskFormat Disk Press YES to Erase ALL Data YES Back To repair a disk Repair DiskRepair Disk Press YES to YES Back Repair Clip Repair Clip DV Mode onlyFile Name File NameUpgrade Upgrade Error Wrong Product Exit Upgrade ErrorsUpgrade Complete Please Restart Diagnostic System ResetUpgrade Error File Not Found Exit System Reset Continue to SYSTEM? YES BackStatus BatteryStatus Placing a Clip in a Reel Reels ScreenReels From the Reels screen, choose the Reels as followsOptional Wired Remote Control p/n ACSS-0019-01 Using a Wired Remote ControlPlay Play Clip Loop Clip Loop ALL Play ALL Play ScreenPlay from Track List Reel List Play From ScreenControl Local JVC GY-HD Syncro Slave AV/C Control ScreenTransport Keys Keeper ReelCamcorder Requirements for External Control Mode Do Not Use AV/C control in Record ModeLCD Display Symbols and Text REC GY-HD100 1394 REC Trig ModeAudio/Video/Timecode Specification PowerPhysical Description Input/OutputsLog Files DTE File FormatsDisk Information Warranty Error MessagesTemperature Years, DR-HD100 Days Accessories including the batteryCompatible Camcorders and Accessories Page Release Part Number MANL-0995-04