FOCUS Enhancements DR-HD100 Saving Loop Record Clips, Another Method to Capture Single Frames

DR-HD100 Functions

Loop Record

Loop Record is similar to Retro Disk.

Loop Record continuously records a series of video clips to available disk space. When all available disk space is used, Loop Record begins sequentially replacing the earliest clip with the most recent.

•The size of the video clip depends on the length of the loop.

•Loops of 60 minutes or less are recorded in one-minute clips.

•Loops greater than 60 minutes, are recorded in 2GB clips.

•When the capacity of the disk is reached, one additional clip is created. The size of the last clip depends on the length of the loop i.e., one-minute or 2GB. The disk must have at least 30 minutes of disk space available for this functionality.

Saving Loop Record Clips

Press STOP during a record session.

The DR-HD100 stops recording and saves the current LOOP RECORD session clips to a folder on the disk.

Snap Record DV modes only

Use Snap to record individual frames. In Snap mode, pressing Record captures individual frames. All the frames recorded in the same session are stored in a single file.

•To start a new SNAP record session, place the unit in STOP between SNAP records.

•Snap Record is available only in DV modes of operation.

•Use Snap in Local, JVC GY-HD,Syncro Slave, and External control modes.

•Removing power from the DR-HD100 in the midst of a Snap recording session causes the unit to return to Normal recording mode when it powers back up.

Another Method to Capture Single Frames

An alternative to Snap is EXT CTL FRAME. For more information see “EXT CTL OFF, Pause, Frame, File” on page 65.

ProHD DR-HD100 Portable DTE Recorder 55