FOCUS Enhancements DR-HD100 manual Repair Disk Press YES to YES Back, To repair a disk

DR-HD100 Functions

Repair Disk

REPAIR DISK

PRESS YES TO

REPAIR DISK

YES BACK

Use this function if a recording session does not complete properly and there is a question that the file may be damaged. For example, recording terminates due to a loss of power to the DR-HD100. Repair Disk scans the entire disk drive checking for and repairing file errors and incomplete files. When the file is repaired it is can be used in the NLE system.

Corrupted Files May Need More Repairs

After running Repair Disk some files may still need further work to restore them. In such a case, run the utility Repair Clip, refer to the following page.

To repair a disk:

Step 1: From the Utilities screen, go to Repair Disk.

Step 2: Select YES and the DR-HD100 begins repairing the disk. A status screen displays the progress of disk repair and at completion displays the message:

•Complete indicating Repair Disk was successful.

•Aborted indicating that there were errors and the repair did not complete.

Step 3: Press BACK to return to the Utilities screen.

Step 4: Move content from DR-HD100.

Step 5: Use Format Disk utility before doing any further recording. This step optimizes disk storage, see “Format Disk” on page 77.

78 ProHD DR-HD100 Portable DTE Recorder