Seagate ST32271N/W/WC/WD/DC, ST32171N/W/WC/WD/DC, ST34571N/W/WC/WD/DC Drive characteristics, Rpm

Page 15

Barracuda 4LP Installation Guide, Rev. B

13

Table 1. Drive characteristics

 

Interface

UltraSCSI [1]

 

Capacity

Formatted [2]

Unformatted

ST34371

4.35 Gbyte [2]

5.31 Gbyte

ST32171

2.16 Gbyte [2]

2.65 Gbyte

ST34571

4.55 Gbyte [2]

5.54 Gbyte

ST32271

2.26 Gbyte [2]

2.77 Gbyte

Recording

 

 

Cylinders (user)

5,178

 

Read/write data heads

 

 

ST32171/ST32271

5

 

ST34371/ST34571

10

 

Access time [3]

 

 

Average read

9.4 msec

 

Average write

10.4 msec

 

Disk rotation

 

 

RPM

7,200 r/min

 

Average latency

4.17 msec

 

Internal transfer rate (variable with zone)

 

ST32171/ST34371

80–122 Mbits/sec

 

ST32271/ST34571

80–126 Mbits/sec

 

Maximum synchronous SCSI transfer rate

 

N model

20 Mbytes/sec

 

W/WD/WC/DC models

40 Mbytes/sec

 

Multi-segmented cache

442 Kbytes

 

[1]Can also be operated according to SCSI-1 and SCSI-2 protocols. Referred to also as “SCSI Fast-20.”

Image 15
Contents Barracuda 4LP Disc Drive Contents Electrostatic discharge protection PrefaceImportant safety information and precautions Page Wichtige Sicherheitshinweise Page Barracuda 4LP Installation Guide, Rev. B European Union Compliance Seagate Technology online services SeaFONE at 1-800-SEAGATESeaNET SeaBOARD Seagate CompuServe ForumBBS Location Modem number Location Telephone number Seagate Technology FAX services SeaFAXSeagate technical support FAX Seagate technical supportSeaTDD General description RPM Drive characteristicsSingle-ended Differential DC power requirements Amps ST34371/ST34571DC power requirements Amps ST32171/ST32271 Dimensions of the drive General information Drive modelsScsi ID jumpers Drive termination Circuits and data path widths Terminator powerCable characteristics for single-ended circuits Fifty pin I/O connection to drive Multiple drive connection to host adapter Multiple-drive connection to host adapter Barracuda 4LP Installation Guide, Rev. B Providing adequate cooling Kühlung des Systems Suggested air flow Abbildung 4. Empfohlener Luftstromverlauf Installation des Laufwerkes und Anschluß der Kabel Mounting the drive and connecting cablesBarracuda 4LP Installation Guide, Rev. B DC power connector Abbildung 5. Gleichstromanschluß Hinweis Page Mounting configuration dimensions Quick reference desktop system notes Formatting the driveSetting the Scsi ID on model N drives Setting the Scsi ID jumpersTerminating the drive Terminating the driveSetting terminator power jumpers Additional jumper options Other applicable jumper optionsWD drives Host Alternate Terminating the drive W model shown Front DC Power Enlarged to Show detail Connector Other option jumpers are available as illustrated below WC/DC drives Jumper options Applicable jumper optionsPage Page