Daewoo DF-8100 user manual DVD Playback, Playing a DVD, Slow reverse playback is not supported

Page 20

DVD Playback

Playing a DVD

1Press [DVD] to set the remote control to operate the DVD deck.

Turn the TV on and select the video input source connected to the DVD Recorder+VCR.

Audio system: Turn the audio system on and select the input source connected to the DVD Recorder+VCR.

2Press [OPEN/CLOSE] to open the disc tray.

3Load your disc in the tray with the playback side down (label side up).

4Press [OPEN/CLOSE] to close the tray.

5’READING’ appears on the front panel display, and playback starts automatically. If playback does not start, press [PLAY (√)]. In some cases, the Disc menu might appear instead.

Playing a DVD+R (+RW)

When a DVD+RW or unfinalized DVD+R is inserted, no title is played automatically but the current TV channel displays on the screen.

If you want to play a title on the DVD+R (+RW), you must press [MENU] or [PLAY] to display the disc menu. Select a title to play then press [ENTER].

If a Disc menu is displayed

•A Disc menu may be displayed when you load a DVD. Use the [œ √…†] buttons to select the title/chapter you want to view, then press [ENTER] to start playback. Press [TITLE] or [MENU] to return to the Disc menu.

•If the Parental Level feature is set and the disc is below the current Parental Level setting, the 4-digit code must be entered and/or the disc must be authorized; see ‘Set Parental Level‘ on page 29.

•The DVD Recorder+VCR will not play discs with Region codes different from the DVD Recorder+VCR. The Region code for this DVD Recorder+VCR is 2 (two).

•Unless stated otherwise, all operations described below use the remote control. Some features may also be available in the Setup menu.

•A disc which is recorded by computer at high speeds (greater than or equal to 2x) may not be recognized.

•A disc which is recorded with unauthorized movie material may not be played.

•A disc which is recorded by other recorder or not recorded correctly may not be recognized or played.

Still Picture and Frame-by-Frame Playback

1Press [PLAY/PAUSE] during playback. The DVD Recorder+VCR will go into Still mode.

2You can back up or advance the picture frame-by-frame by pressing [FF (√√)] repeatedly during Still mode.

Fast Forward/Backward

1Press [REW (œœ)] or [FF (√√)] during playback. The DVD Recorder+VCR will go into Search mode.

2Press [REW] or [FF] to select the desired speed: √√ X2, √√ X4, √√ X8, √√ X16, √√ X32, √(forward) or œ, œœ X2, œœ X4, œœ X8, œœ X16, œœ X32 (backward).

Slow Motion

Press [SLOW+] to enter Slow Motion mode. The default speed is 1/2. When you press [SLOW+] repeatedly, the speed will be set to 1/4, 1/8, and normal speed.

• Slow reverse playback is not supported.

DVD Playback

Changing the Audio Language

Press [AUDIO] and then press [AUDIO] repeatedly during playback to hear a different audio language or audio track.

Subtitles

Press [SUBTITLE] and then press [SUBTITLE] repeatedly during playback to select among all available subtitle languages.

Camera Angle

If a DVD contains scenes recorded at different camera angles, angle icon displays automatically. You can select among these angles during playback.

Press [ANGLE] and then press it repeatedly during playback to select the desired angle. The number of the current angle appears on the TV screen.

• The Camera Angle icon is displayed on the TV screen when alternate angles are available.

Zoom

The Zoom function allows you to magnify the video image and scroll around the enlarged image.

1

Press [ZOOM] during Play mode to activate the Zoom function.

 

3

Each press of the [ZOOM] button changes the Zoom level as follows: X1 (normal size) ➝ X2 ➝ X4 ➝ X1

PLAYBACK

To resume normal playback, press [ZOOM] repeatedly until the X1 (normal picture) appears.

2

(normal size)

 

Use the [œ √…†] buttons to scroll around the zoomed picture.

 

• The Zoom function may not work on some DVDs.

• The Zoom function does not work in PAUSE mode.

Repeat

1To repeat the currently playing chapter, press [REPEAT]. ‘REPEAT CHAPTER’ appears on the TV screen.

2To repeat the currently playing title, press [REPEAT] twice. ‘REPEAT TITLE’ appears on the TV screen.

3To repeat the whole disc, press [REPEAT] three times. ‘REPEAT DISC’ appears on the TV screen.

4You can play in other modes (including Repeat, A-B, Shuffle, or Scan) by pressing [REPEAT] repeatedly.

•You can repeat a scene that starts when ‘Repeat A-‘ displays on the screen. To mark the end point, press [A-B]. Press [A-B] again to repeat the scene.

A-B

You can repeat a scene between two points (A and B):

1Press [PLAY/PAUSE] play to the start of the desired scene.

2Press [A-B] to mark the start point.

3Use [FF], [NEXT] to search the end point.

4Press [A-B] to mark the end point.

5The marked scenes are repeated continuously until you stop the repeat by pressing [A-B] button again.

36

 

 

 

37

 

 

Page 19 Page 21
Image 20
Page 19 Page 21
Contents DVD Recorder + VCR 97P95600D0-1VSafetyty InstructionsI t ti Alcohol- based cleaning agentsPrecautions For your own SafetyImportant Safeguards Unit leave all servicing to qualified service personnelAvoid direct exposure to beam All operating and use instructions should be followedTable of Contents Following discs can be used in your DVD Recorder+VCR OverviewiNumber of this player, the disc cannot be played To keep the surface clean PrecautionsAbout Symbols After playing, store the disc in its caseIdentification of Controls Remote Control Turns the DVD Recorder+VCR on and offDetails, Refer to One Touch Record OTR on Copies from DVD to VCR or from VCR to DVDIf your cable wire is connected to your TV without a ConnectionstiConnect to a TV with an RF coaxial input Connect to a TV with an S-Video InputAmplifier. Use an optional digital coaxial audio cable Connecting a TVConnecting an Amplifier/Receiver Initial Installation Connecting Optional EquipmentInitial Installation DV Digital CamcorderInitial Setup Press Setup to exit the Setup menuCable If you are using basic cable to receive channels After finishing Auto Channel Search, set the clockSet Clock Set ClockAuto Set Follow the same procedure as the ‘DVD Record Quality’ Press SETUP. The Setup menu appearsUse œ and √ to select ‘Language‘ Press Enter to move to the second levelPress Setup Use œ/√ to select ‘Preferences‘ Press ENTER. The ‘Video‘ submenu is displayedFlickering Scart jacks, set Video Output to ‘RGB’No signal will be output from the Digital Audio Out jacks Enter your new passwordDisplayed Use …/† to select the desired digital output typePassword Auto SettingsPress Enter to display the submenu Press ENTER. The ‘Parental Controls‘ submenu appearsOn-Screen Displayi l Overviewverview Function does not work Use …† to change the numbers Press Enter to confirmOSD Menu Options for DVD Slow reverse playback is not supported DVD PlaybackPlaying a DVD It will be automatically selected by the DVD Recorder+VCR VCR PlaybacklŒ3 1 √ † Special Playback Features Othert Disci PlaybacklTo return to normal playback, press Play DVD Recorder+VCR can display Jpeg files on CD-R/RWBasicic Recordingi Follow the instructions below to record a TV programMake sure your TV input is set to view the DVD Recorder+VCR Playing MP3 Files During a Slide ShowSP Standard Play LP Long Play, 2 times SP Insert the VHS videotape you wish to copy into the VCR deck Tape endsDuring one touch copy you can search and resume copy One Touch Copy VHS to DVDWhen the earlier program finishes, the later program starts Canceling a Timer RecordingStopping a Timer Recording in Progress Timer Recording TroubleshootingRecording from External Components Recording from an External InputDV appears on the front panel display and the TV screen Editing Title Menu You can erase titles on DVD+RW discs onlyChange Disc Name Play a TitleCharacter or function and press Enter CLR Clear the whole titleSP Add a space Save Save the title nameTroubleshooting Clean the video headsTurn on the TV Audio cables are not connected securelyTechnicali l Specificationsi i ions Video output terminal, 1.0 Vp-p, unbalanced Video output DVDAudio output DVD Video output YYour 1ST Year MANUFACTURER’S Guarantee Daewoo Guarantee Department
Top Page Image Contents