Daewoo DF-8100 user manual Othert Disci Playbackl, To return to normal playback, press Play

Page 22

VCR Playback

Special Playback Features

Notes on special playback features

Horizontal lines (noise bars) will appear on the TV screen. This is normal.

The audio is automatically muted during special playback modes, so there is no sound during search, slow motion, etc. During high-speed picture search, a short time is needed to stabilize tape speed when re-entering Play mode. Slight interference may be observed during this time.

Fast Forward/Backward

This function lets you visually search forward and backward for a desired scene on your tape.

1Press [REW] or [FF] during playback. Search mode will be activated.

If the DVD Recorder+VCR is left in Search mode for more than 3 minutes, the DVD Recorder+VCR will automatically resume Play mode to protect the tape and video heads.

2To return to normal playback, press [PLAY].

Still Picture

1Press [PLAY/PAUSE] during playback.

A still picture appears on the TV screen.

If a still picture vibrates vertically, stabilize it by using the [TRACKING +/-] buttons on the remote control.

If the DVD Recorder+VCR is left in Still mode for more than 5 minutes, the DVD Recorder+VCR will automatically enter Stop mode to protect the tape and video heads.

2To return to normal playback, press [PLAY].

Slow Motion

1Press [SLOW+] for Slow Motion playback.

2Press [SLOW+] and [SLOW-] repeatedly to adjust the Slow Motion playback speed.

Counter Memory Function

This is useful if there is a section of tape you want to view immediately after recording or if you want to return to the same point several times.

1Begin recording or playing a tape.

2At the point you want to locate later, reset the real-time counter to 0:00:00 by pressing [CLEAR]. Continue to play or record.

3Press [STOP] when recording or playback finishes.

4You can make the tape automatically stop when the counter returns to about ‘0:00:00‘ by setting the counter to ‘0:00:00‘ in the ‘Go-To Search‘ function under ‘Setup’ ➝ ‘Preferences’ ➝ ‘VCR’; see page 32.

Othert Disci Playbackl

Audio CD/MP3 PLAYBACK

The DVD Recorder+VCR can play audio CDs and MP3 files on CD-ROM, CD-R or CD-RW discs.

1Insert the CD disc and close the tray. The Audio CD or MP3 CD menu appears on the TV screen after a few moments to load the disc.

2Use […†] to select a track or a file, then press [PLAY] or [ENTER].

During playback, the current track's elapsed playing time will appear on the front panel display and menu. Playback will stop at the end of the disc.

•On the MP3 CD menu, you can display the folders on the disc. Use

[…†œ √] to select the folder icon on the MP3 CD menu then press [ENTER] or [PLAY]. You can also display just the tracks in the folders. Use […†œ √] to select a folder then press [ENTER].

3While playing an Audio CD, use [FF] or [REW] for 2x speed playback.

4Use [PLAY/PAUSE] to pause playback while the disc is playing.

5To stop playback at any time, press [STOP].

•Press [REPEAT] to repeat a track (file) and press again to repeat the whole disc.

•If the disc contains JPEG files as well as MP3 files, you can change the Play mode to display JPEG image files by pressing [TITLE].

JPEG PLAYBACK

The DVD Recorder+VCR can display JPEG files on CD-R/RW.

1Insert your CD and close the tray. The JPEG CD folder tree appears.

2If there are folders which contain JPEG files, select the desired folder using […†œ √] and press [ENTER].

••• Audio CD •••

••• MP3 •••

PLAYBACK

40

 

 

 

41

 

 

Page 21 Page 23
Image 22
Page 21 Page 23
Contents DVD Recorder + VCR 97P95600D0-1VPrecautions Safetyty InstructionsI t tiAlcohol- based cleaning agents For your own SafetyAvoid direct exposure to beam Important SafeguardsUnit leave all servicing to qualified service personnel All operating and use instructions should be followedTable of Contents Number of this player, the disc cannot be played OverviewiFollowing discs can be used in your DVD Recorder+VCR About Symbols To keep the surface cleanPrecautions After playing, store the disc in its caseIdentification of Controls Details, Refer to One Touch Record OTR on Remote ControlTurns the DVD Recorder+VCR on and off Copies from DVD to VCR or from VCR to DVDConnect to a TV with an RF coaxial input If your cable wire is connected to your TV without aConnectionsti Connect to a TV with an S-Video InputConnecting an Amplifier/Receiver Connecting a TVAmplifier. Use an optional digital coaxial audio cable Initial Installation Initial InstallationConnecting Optional Equipment DV Digital CamcorderCable If you are using basic cable to receive channels Initial SetupPress Setup to exit the Setup menu After finishing Auto Channel Search, set the clockAuto Set Set ClockSet Clock Use œ and √ to select ‘Language‘ Follow the same procedure as the ‘DVD Record Quality’Press SETUP. The Setup menu appears Press Enter to move to the second levelFlickering Press Setup Use œ/√ to select ‘Preferences‘Press ENTER. The ‘Video‘ submenu is displayed Scart jacks, set Video Output to ‘RGB’Displayed No signal will be output from the Digital Audio Out jacksEnter your new password Use …/† to select the desired digital output typePress Enter to display the submenu PasswordAuto Settings Press ENTER. The ‘Parental Controls‘ submenu appearsOn-Screen Displayi l Overviewverview OSD Menu Options for DVD Use …† to change the numbers Press Enter to confirmFunction does not work Playing a DVD DVD PlaybackSlow reverse playback is not supported Œ3 1 √ † VCR PlaybacklIt will be automatically selected by the DVD Recorder+VCR To return to normal playback, press Play Special Playback FeaturesOthert Disci Playbackl DVD Recorder+VCR can display Jpeg files on CD-R/RWMake sure your TV input is set to view the DVD Recorder+VCR Basicic RecordingiFollow the instructions below to record a TV program Playing MP3 Files During a Slide ShowSP Standard Play LP Long Play, 2 times SP During one touch copy you can search and resume copy Insert the VHS videotape you wish to copy into the VCR deckTape ends One Touch Copy VHS to DVDStopping a Timer Recording in Progress When the earlier program finishes, the later program startsCanceling a Timer Recording Timer Recording TroubleshootingDV appears on the front panel display and the TV screen Recording from an External InputRecording from External Components Editing Change Disc Name Title MenuYou can erase titles on DVD+RW discs only Play a TitleSP Add a space Character or function and press EnterCLR Clear the whole title Save Save the title nameTurn on the TV TroubleshootingClean the video heads Audio cables are not connected securelyTechnicali l Specificationsi i ions Audio output DVD Video output terminal, 1.0 Vp-p, unbalancedVideo output DVD Video output YYour 1ST Year MANUFACTURER’S Guarantee Daewoo Guarantee Department
Top Page Image Contents