Daewoo DF-8100 user manual On-Screen Displayi l Overviewverview

Page 18

Initial Setup

VCR

On-Screen Displayi l Overviewverview

The On-Screen Display provides feedback on the status of the DVD Recorder+VCR and/or the currently loaded disc or tape. To access the On-Screen Display (or OSD), press [DISPLAY].

This feature enables you to search for Index marks or specific times on your VHS tapes.

1While ‘Preferences‘ is selected, press [†] to move to the second level.

2Use […/†] to select ‘VCR‘.

3Press [ENTER] to display the submenu.

4Select ‘Index+’, ‘Index–’ or ‘Go to Zero’.

5If you select ‘Index+’ (or ‘Index–’) and press [ENTER], your DVD Recorder+ VCR will locate your index mark and begin playback.

Preferences

Video

Audio

Parental Controls

Auto Settings

VCR

Instructions

Enter-Confirm Setup-Exit Move …†

Displaying Disc Information

To display information about the currently loaded disc or tape:

On-screen display operation

1Press [DISPLAY] repeatedly to display/change the information displayed on-screen.

2To remove the on-screen display, press [DISPLAY] repeatedly until it disappears.

See the descriptions below for detailed explanations of the on-screen displays for each media type.

6If you select ‘Go-To Search’ and press [ENTER], your DVD Recorder+ VCR will wind to the position 0:00:00

and stop.

VCR

 

 

VCR

 

 

VCR

 

 

 

 

 

 

Index+

 

 

 

Index+

 

 

Index+

 

 

Index–

 

 

 

Index–

 

 

 

Index–

 

 

Go to Zero

 

 

 

Go to Zero

 

 

 

Go to Zero

 

• Some discs may not provide all the features shown in the on-screen display examples.

Temporary Feedback Icons

Action prohibited or not available

SETUP

• The VCR menu is activated only when a video cassette tape is inserted.

System Information

System Information helps service personnel identify key firmware information about your DVD Recorder+VCR in case service is required.

Restore Defaults

System Info

Version

EP Set 1.0

Main Build

DR3-1.0.2

Micom Software

0.0.0

DVD Navigation

1.0.0

Loader Version

DVS-RA20

Instructions

Enter-Confirm Setup-Exit

Move …†

Changing TV Channels

If no disc is playing, you can change TV channels using the [0-9] or [PR+/–] buttons on the remote control or [PR+/–] buttons on the front panel.

Changing the TV Audio Channel

You can change the TV audio using the [AUDIO] button.

Press [AUDIO] repeatedly to change the TV audio, according to the Broadcast audio signal as shown below.

• STEREO Audio Signal

Stereo ➝ Mono ➝ Stereo

• BIL Audio Signal

BIL I ➝ BIL II ➝ (BIL Off) ➝ BIL I

PLAYBACK

If you wish, you can reset the DVD Recorder+VCR to its original factory settings.

• MONO Audio Signal

Mono

1Press [SETUP].

2Use [œ/√] to select ‘Restore Defaults‘.

3Press [ENTER].

4The Initialize menu will appear. Use the […/†] buttons to select ‘Yes‘ and press [ENTER].

•Some options cannot be reset, including Parental Controls, Password, and Country Code.

Restore Defaults

If you select this function all

settings will be removed and

Are you sure you want to restore the product will be set into

default settings? initial (factory) mode.

Yes

No

Instructions

Enter-Confirm Setup-Exit

Move …†

The current audio channel is displayed on-screen.

•If the sound is poor quality when set to Stereo, you can often improve it by changing to Mono.

•When an external input is selected, the audio channel can be switched only to Stereo.

•After Restoring Defaults the unit reboots automatically and the Installation menu appears. You must set the country, language, channel, and clock settings again.

32

 

 

 

33

 

 

Page 17 Page 19
Image 18
Page 17 Page 19
Contents DVD Recorder + VCR 97P95600D0-1VPrecautions Safetyty InstructionsI t tiAlcohol- based cleaning agents For your own SafetyAvoid direct exposure to beam Important SafeguardsUnit leave all servicing to qualified service personnel All operating and use instructions should be followedTable of Contents Overviewi Number of this player, the disc cannot be playedFollowing discs can be used in your DVD Recorder+VCR About Symbols To keep the surface cleanPrecautions After playing, store the disc in its caseIdentification of Controls Details, Refer to One Touch Record OTR on Remote ControlTurns the DVD Recorder+VCR on and off Copies from DVD to VCR or from VCR to DVDConnect to a TV with an RF coaxial input If your cable wire is connected to your TV without aConnectionsti Connect to a TV with an S-Video InputConnecting a TV Connecting an Amplifier/ReceiverAmplifier. Use an optional digital coaxial audio cable Initial Installation Initial InstallationConnecting Optional Equipment DV Digital CamcorderCable If you are using basic cable to receive channels Initial SetupPress Setup to exit the Setup menu After finishing Auto Channel Search, set the clockSet Clock Auto SetSet Clock Use œ and √ to select ‘Language‘ Follow the same procedure as the ‘DVD Record Quality’Press SETUP. The Setup menu appears Press Enter to move to the second levelFlickering Press Setup Use œ/√ to select ‘Preferences‘Press ENTER. The ‘Video‘ submenu is displayed Scart jacks, set Video Output to ‘RGB’Displayed No signal will be output from the Digital Audio Out jacksEnter your new password Use …/† to select the desired digital output typePress Enter to display the submenu PasswordAuto Settings Press ENTER. The ‘Parental Controls‘ submenu appearsOn-Screen Displayi l Overviewverview Use …† to change the numbers Press Enter to confirm OSD Menu Options for DVDFunction does not work DVD Playback Playing a DVDSlow reverse playback is not supported VCR Playbackl Œ3 1 √ †It will be automatically selected by the DVD Recorder+VCR To return to normal playback, press Play Special Playback FeaturesOthert Disci Playbackl DVD Recorder+VCR can display Jpeg files on CD-R/RWMake sure your TV input is set to view the DVD Recorder+VCR Basicic RecordingiFollow the instructions below to record a TV program Playing MP3 Files During a Slide ShowSP Standard Play LP Long Play, 2 times SP During one touch copy you can search and resume copy Insert the VHS videotape you wish to copy into the VCR deckTape ends One Touch Copy VHS to DVDStopping a Timer Recording in Progress When the earlier program finishes, the later program startsCanceling a Timer Recording Timer Recording TroubleshootingRecording from an External Input DV appears on the front panel display and the TV screenRecording from External Components Editing Change Disc Name Title MenuYou can erase titles on DVD+RW discs only Play a TitleSP Add a space Character or function and press EnterCLR Clear the whole title Save Save the title nameTurn on the TV TroubleshootingClean the video heads Audio cables are not connected securelyTechnicali l Specificationsi i ions Audio output DVD Video output terminal, 1.0 Vp-p, unbalancedVideo output DVD Video output YYour 1ST Year MANUFACTURER’S Guarantee Daewoo Guarantee Department
Top Page Image Contents