1Unpack Your OptiVault
4 Loading Media (Discs) continued | 6 Connecting the USB 2.0 Cable |
The following items are contained inside the box:
•OptiVault
•Gray Plastic Input and Output Bins
(Located in the Cardboard Insert)
•Switching Power Supply with Power Cord
•One
•One Monochrome Black Ink Cartridge
•QuickStart Installer Disc
•USB 2.0 Interface Cable
•Keys
•Warranty Card
•10 Pack Primera TuffCoat Archival Media
•This Operator's Manual, Quick Start Guide and Other Printed Information
TIP! Save the carton and packing materials. They will come in handy later if you ever need to transport the OptiVault and/or any of its parts and accessories.
Refer to the following steps when loading discs in to the OptiVault:
•Open the front cover of the OptiVault
•The OptiVault will automatically position the cartridge carrier and Robotic Disc Transporter to the center position allowing for easy access to the bins.
•Load the Input
Bin (the bin located on the
Note: Bins are located inside the Cardboard Insert!
Connect the OptiVault to your computer with the USB 2.0 Cable.
If you are using Windows, after a few moments a found new hardware wizard will appear.
Select "Install the software automatically" and click Next. Make sure that you have your installation disc in a drive on your computer.
2Installing the PC Software
The Installer Disc will guide you through the process of setting up your OptiVault. Please refer to the following for more information on each step:
1.Place the OptiVault Installer CD in your
moments. If it does, proceed to Step 2. If it does not auto-
matically launch, follow these steps:
•
•
2.In the Installer Application, click Standard Install. The Standard Install will guide you
3Applying Power
Be sure you have removed the packing tape and cardboard insert prior to applying power.
•Locate the power adapter supplied with your OptiVault.
•Place one
end of the adapter cord into the power
port on the
rear panel of the OptiVault and the other end into a power outlet.
•Unit will initialize for approximately 30 seconds.
4Loading Media (Discs)
Note on Loading Media: Only 25 discs total can be loaded into the input bin, output bin and drive at any one time.
Note on Media: For reliable, consistent operation of your OptiVault, we strongly encourage you to use only genuine Primera TuffCoat Archival Media available at www.primerastore.com. There are documented quality differences between different brands of media. Primera has not researched the archival life nor can it support
the recording characteristics and/or performance of other brands of optical media.
5Installing Ink Cartridges
•Press the Ink Cartridge Button 
to move the Ink Cartridge Carrier to the load position and open the ink cartridge covers
•Remove each ink cartridge from its pack- aging
•Slowly remove the tape covering the cartridge's print head, being careful to avoid damaging the
barcode label on the underside of the cartridge.
DO NOT TOUCH
THE COPPER AREA!
•Insert the ink cartridges into the carrier, copper end first and snap the cartridge cover in place. Insert the color in the left holder, monochrome black in the right cartridge holder.
Color Black
Pull out and lift up
•Close and lock the OptiVault’s front cover.
Note: The OptiVault will not function unless the front cover is closed and locked!
You may see a notice like the one shown below stating that the device has not passed Windows Logo Testing. Click Continue Anyway to continue installing the printer driver for your OptiVault.
In the installer application, follow the steps shown on your monitor to complete the installation of the Retrospect and SureThing software.