NOTE: DVDs with a DTS soundtrack almost always have it configured as an option to the standard matrix Dolby Surround format. To use DTS, you may have to go to the setup menus at the beginning of the DVD and se- lect “DTS 5.1” instead of “Dolby Surround” or “Dolby Digital 5.1”.
All-Channel Stereo
DSP
This mode digital processing to synthesize the ambience of four different concert venues (LIVE CLUB, DANCE CLUB, HALL, PAVILION) using only the front and rear speakers, but not the center channel speaker.
DSP modes can be selected for any stereo source input, analog or digital.
Surround Off
Turns off all surround sound processing for 2- channel stereo. Even if connected, the center channel and surround speakers are not used. If the system is configured to route bass sig- nals from the front speakers to the subwoofer, this capability remains in effect.
Surround Off can be selected for ANY input source.
Manually Selecting
Surround Modes
For users who prefer a more active role in setting surround modes, buttons on the remote and the front panel provide manual selection of surround modes that are not automatically de- tected or, in some cases, to override an auto- matic setting.
NOTE: These settings are memorized indepen- dently for each source input and will be used as a default setting each time that source is used.
22
Surround Sound On/Off 
P2-G
Press the SURROUND ON/OFF button on the front panel or the
Selecting a Surround Sound Mode 
P2-F
When the Surround Sound is turned On (see above), use the SURROUND MODE button on the front panel or the SURR + button on Page 2 of the remote to select a surround mode for stereo sources. Each press of the button steps to the next available option:
PLII Movie: Dolby Pro Logic Movie
PLII Music: Dolby Pro Logic Music
LIVE CLUB: DSP mode for small music club
DANCE CLUB: DSP mode for larger club
LIVE HALL: DSP mode for large concert venue
PAVILION: DSP mode for large arena
ALL STEREO: Stereo signal sent to front and rear speakers.
NOTE: None of these settings are available for 2 speaker systems. PLII Movie and Music are the only settings available for
Basic Tuner Controls
The
NOTE: Some of the buttons described in the following sections may have different func- tions for other source inputs. Be sure to select the FM/AM input on the
Selecting FM/AM 
Press the FM/AM button to select the AM/FM tuner input. The tuner will be tuned to the last station, AM or FM.
Press the FM/AM button to toggle between AM and FM reception. An indicator in the front- panel display confirms your choice and the currently tuned station frequency is shown.
Tuning from the Front Panel 
1.Repeatedly press the CONTROL 
but- tons until the word TUNING appears in the front panel.
2.Repeatedly press one of the CONTROL 
buttons until the desired frequency appears in the display.
3.For seek tuning, press and hold one of the CONTROL buttons. When you release the button, the tuner will continue increasing or decreasing the frequency until the next available station is found.
Tuning from the Remote 
1.Repeatedly press the CH +/– hard buttons
or the TRACK 
buttons on Page 3 of the remote until the desired frequency appears in the display.
2.For seek tuning, press and hold one of the
CH +/– or TRACK 
buttons. When you release the button, the tuner will con- tinue increasing or decreasing the frequency until the next available station is found.
Storing/Tuning Station Presets from the Front Panel 
The
To memorize presets:
1.Tune to the desired station.
2.Press the MEMORY button.
3.Press one of the CONTROL 
buttons until the desired PRESET NUMBER flashes in the display.
4.Press the MEMORY button to store the preset.
5.To memorize another station, press a CON-
TROL 
button to tune to the desired sta- tion and repeat steps 2 through 4.
NOTE: There is a time limit for these steps. If the time limit expires before memorizing a station, repeat the process.
To tune to a preset station:
1.Select the FM/AM input.
2.Press one of the CONTROL 
buttons until the word PRESET appears in the display.