| 14 |
Selection Indicators | Front Panel |
|
Status/Disc Type displays the current status of the unit (Open, Close, No Disc, etc.).
When using specific features during playback (such as Language selection, Time Display, Repeat Mode, etc.), indicators appear in the
NOTE: A hand icon is displayed when a but- ton press is not a valid operation accepted by the unit for the disc you are playing.
Menu Screens
A number of menu screens can appear dur- ing configuration of the
SETUP MENU
GENERAL SETUP
SPEAKER SETUP
AUDIO SETUP
PREFERENCES
EXIT SETUP
GO TO GENERAL SETUP PAGE
The menu screens provide access to various settings and features described in the Configu- ration section of this manual. The menu sys- tem appears when the OSD button is pressed, typically whether the disc or stopped or play- ing. The OSD menu does not appear when a
The following is a brief overview of the con- trols and features on the front panel of the
POWER Button
POWER LED
The POWER button serves as a master on/ off switch. In the out position, the unit is com- pletely powered down and cannot be activated by the remote. Press the button in to activate the unit, indicated by the front panel display being illuminated. With the front panel POWER button in the on position, the remote control ON/OFF buttons are used to activate the unit or put it in standby mode. In standby mode, the POWER LED remains lit, but the front panel display is turned off.
NOTE: Pressing the OPN/CLOSE or the PLAY/ ENTER buttons also activate the unit from standby mode.
LED Indicators
Two
When a disc is playing, this section of the display shows the sampling rate and format of the disc
Audio Format displays the audio for- mat of the inserted disc (Dolby Digital, DTS, PCM, etc.)
Remain shows the letter R when the re- maining time of disc or selection is being dis- played.
Time displays the elapsed time when a disc is playing
Function indicates which special features are activated, A in the first segment for angle, Z in the second segment for zoom, an indi- cator for the type of repeat in the fourth seg- ment, and an L in the fifth segment when the OSD is being shown during setup or when playback is stopped with the resume feature storing the current position on the disc.
Audio Channel shows which of the six possible audio channels are in use. 2/0 indi- cates a stereo signal, 3/2 indicates a five channels with three front and two surround, 1CH to 6CH for
Disc Drawer
A
OPN/CLOSE Button
Press to open or close the Disc Drawer.
Screen Saver
To prevent damage to a TV monitor during prolonged display of a static image, the unit automatically activates a moving DVD logo screen saver display after several minutes.
The screen saver display is turned off, return- ing to the previous display, when any front- panel or remote button is pressed.
Front-Panel Display
Alighted display on the
Title/Group displays the number of the current Title or Group.
Chapter/Track displays the number of the current Chapter or Track.
Play/Pause shows a play or pause in- dication.
Remote Sensor
The remote sensor receives infrared signals from the remote control. Do not cover or block the sensor.
PLAY/ENTER Button
Press the PLAY/ENTER button to start play- ing the disc from the beginning or to resume play if playback is paused.
The PLAY/ENTER button is also used to enter selections from