When using RAID
The following description is when MD3200M has internal primary disk and 1 set of IEEE1394 RAID.
<Note RAID>
Even though several HDDs are connected to RAID, MD3200M will recognize them as only one HDD. For connection and setup of RAID, please refer to the manual of related device.
(1)When external HDD RAID is connected to IEEE1394 port, “Disk Manager” runs automatically. If not, run it manually in “MenuUtilityDisk Manager”.
(2)Select a second HDD of [F] Ext and configure a size of alarm partition. Press the “Apply” button after selecting action as “Add”. Then [F] is changed to [R].
<Note>
If connecting the device that is used in MD3200M, type will be indicated as [V].
(3) Press the [EXIT] button to shut down “Disk Manager”.
54