Functions
There are 10 different functions for the
Copy
The Copy function is used to copy your master disc to the blank media. The
1. Copy
Place your master disc into the TOP DVD reader drive.
Place your blank media into the BOTTOM DVD writer drive.
Press the ENT button on the controller interface.
The data will now be copied to the blank disc.
Copying – 52x | 18% |
150.4MB | 01:15 |
|
|
When the job is completed, the recorded disc will be ejected from the BOTTOM drive. The display will read:
1.0Copy
OK: 01
NOTE: CD masters must be copied to CD media, and DVD masters must be copied to DVD media.
Test
The Test function is used to simulate copying your master disc to the blank media. To use the Test function, press the ▼ button on the controller until Test is displayed:
2. Test
In Test mode, the blank media will remain blank and can be used again.
Place your master disc into the TOP DVD reader drive.
Place your blank media into the BOTTOM DVD writer drive.
Press the ENT button on the controller interface.
The duplicator will now simulate writing to the blank disc.
Testing – 52x | 18% |
150.4MB | 01:15 |
|
|
When the job is completed, the recordable disc will be ejected from the BOTTOM drive. The display will read:
2.0Test OK: 01
8