MicroBoards Technology QD-DVD user manual Copying DVD 71% 1269.5 MB 0115, Hardware Description

Page 6

Hardware Description

Controller Interface

Reader Drive

Recorder Drive

Power Switch

Power LED

The QD-DVD system consists of a DVD reader, DVD Writer, USB Connection, and Controller module.

The master discs always go into the TOP DVD Reader drive.

The blank media will always go into the BOTTOM DVD Recorder drive.

The power switch and power LED are also located on the front of the QD-DVD duplicator.

The USB Connection is located on the back of the QD-DVD.

The LCD display will show the different menu selections and also information pertaining to the recording process. Here is a typical example of what is displayed during the COPY process:

Displays the function being performed,

Shows the percentage

such as Copying or Testing, and shows the

completed for this action.

record speed during duplication.

 

 

 

 

 

 

 

Copying – DVD

71%

 

 

1269.5 MB

01:15

 

 

 

 

 

Displays the amount of data left to be recorded. This number starts at the capacity of the master and counts down.

Shows the time remaining to complete this action. This number also counts down.

6

Image 6
Contents QD-DVD Page Table of Contents Page Unpacking your system InstallationIntroduction Basic InstructionsCopying DVD 71% 1269.5 MB 0115 Hardware DescriptionENT Functions CopyTest Test & Copy Test & CopyVerify VerifyCompare PrescanDisc Info Edit TrackCopying 52x Edit 1/16 → 1/1 Select Track End 1TrackEnd Edit Disc And burn? YES Burn CompleteUSB Mode Setup DVD Burn Speed LanguageCD Burn Speed Read SpeedButton Sound Burn ModeDisplay Time Device InfoAdvanced Setup Menu Accessing the Advanced Setup MenuUnderRun Protect Diagnostic Read Error SkipUpdate Firmware Load DefaultSpecifications Technical SupportAppendix 1 List of Functions Normal Conditions Firmware UpdateAppendix 2 LCD Messages Audio Editing