Rear Panel

2	4		7	9	11	1
3	5	6	8		10

IMPORTANT!

Connect the AC cord only after the antenna and all optional equipment have been connected. Never make or change any connections when the power is switched on.

The rating plate is located at the rear panel of the unit.

1.Power Cord

2.Antenna In

Antenna or cable input.

3.Antenna Out

Antenna loop through output.

4.Video Input (AV1)

For connecting video signals from the corresponding video out jacks on the auxiliary items, e.g. TV, VCR or satellite receiver.

5.Audio Inputs (AV1)

For connecting audio (Left / Right) input signals from auxiliary sources such as VCR, TV or Satellite Receiver and playing them through this Digital Video Recorder.

6.S-Video Input

For connecting video signals from the corresponding S-Video out jacks on the auxiliary items, e.g. TV, VCR or satellite receiver.

7.Composite Video Output

For connecting to TVs (Most TVs have this type of connections. If your TV has Component or S-Video inputs, a better picture will be obtained).

8.Composite Audio Output

For connecting to TVs (Most TVs have this type of connections. If your TV has Component or S-Video inputs, a better picture will be obtained).

9.Component Video & Progressive Outputs

For connecting TV with component video input (using component video cable, not provided).

10.S-Video Output

For connecting the S-VIDEO IN jack on the TV using an optional S-Video cable. This type of connection will provide superior picture quality. However, your TV must be equipped with an S-Video input socket.

GB 8