DVD Premium Pro LightScribe Series | MICROBOARDS TECHNOLOGY, LLC |
Copy Disc to Disc
1.Place the Master Disc into the Reader drive.
Place the blank disc(s) into the Recorder drive(s) and wait 10 seconds for the light(s) on the front of the Recorder(s) to stop blinking. Note that the blanks must be of the same media type as the master; you cannot copy a CD master to DVD’s, for instance.
2.The display reads COPY START? (DISC to DISC).
3. Press YES. If you have the Auto Run feature set to ON, the duplication will begin when the master is loaded and all drives are loaded with blank media.
4.The drive trays will open on any recorder without blank discs installed. If you do not want to make a copy in those drives, close the tray(s), wait for the drive light to go out, and then press the YES button to start the copy job.
5. | The display will now show the progress of the Copy | COPY |
|
|
| 4.0GB | |
| Job. | DVD |
|
|
|
| 25% |
|
|
|
|
| |||
6. | The Recorder(s) will eject the recordable discs when |
|
|
|
|
|
|
the job is complete.
Printing Disc to Disc
1.Place a disc containing your print image into the Reader drive.
2.Place the unprinted disc(s) into the Recorder drive(s) with the print surface down and wait 10 seconds for the light(s) on the front of the Recorder(s) to stop blinking.
3. | Press ▼ until the display reads PRINT START? (DISC | PRINT Start? |
|
| |||||
| to DISC). |
|
| ||||||
4. | Press YES. If you have the Auto Run feature set to ON, | (DISC to DISC) |
|
| |||||
|
|
|
|
|
|
|
| ||
| the duplication will begin when the master is loaded and |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| all drives are loaded with blank media. |
|
|
|
|
|
|
|
|
5. | If you have more than one print image on the disc in the reader drive, use the ▼ button to |
| |||||||
| scroll through the list. Press the YES button when the image you want is displayed. |
|
| ||||||
6. | The drive trays will open on any recorder without discs loaded. If you do not want to print |
| |||||||
| to those drives, close the tray(s), wait for the drive light to go out, and then press the YES |
| |||||||
| button to start the print job. |
|
|
|
|
|
|
|
|
|
|
| |||||||
7. | The display will now show the progress of the Print Job. |
|
| ||||||
8. | The Recorder(s) will eject the printed discs when the job | LS |
|
|
|
|
| 25% |
|
| is complete. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Registering Data to the Hard Drive (HDD)
1.At the COPY START? (DISC to DISC) menu, press the NO or ▼ button until the display shows MASTER SELECT? (DISC TO DISC)
2.Place the Master disc into the Reader drive.
3.Press the YES button.
4.The display will show:
5.Press the NO or ▼ button
6.The display will now show:
The number in the lower right corner of the display indicates the amount of free space remaining on the hard drive.
150GB
11