Orbit 3 | MICROBOARDS TECHNOLOGY, LLC |
Accessing the Setup Menu
1.At the COPY START? (DISC to DISC) menu, press the NO, ▼, or ▲ buttons until the display shows
SYSTEM SETUP? SYSTEM SETUP?
2.Press the YES button
3.Pressing the NO or ▼ button will allow you to navigate through the menu.
4.Pressing the YES button will allow you to view or change the configuration of the system.
5.Please follow the flow chart on page 12 to navigate through the different menus.
Here is a description of each System Setup menu item:
Master Source
The default is set to
•Disc To Disc – This option will use the reader drive during every duplication cycle.
•Disc To HDD – This option will register the master in the reader drive to the selected hard drive partition from the Copy Start menu. After registering the master, the reader drive will eject and the duplication process will begin automatically.
•HDD To Disc – This option will only be available after a master has been registered to the hard drive. Answering YES to this option will allow you to select as the master any partition containing a master image. Only those partitions containing a master image will be available for selection.
•Delete – This option is used to delete the master images on the selected hard drive partitions. This option will only be available after a master has been registered to the hard drive. Press the YES button to delete the image on the displayed hard drive partition.
Burn Disc
Answering NO to this item will set the Orbit 3 in test mode. remaining blank. DVD +R media is not compatible with simulation attempt.
Duplication will be simulated, with the discs simulation and will be burned during a
Use Buzzer
Allows you to turn the notification buzzer on or off.
CD Write
This menu item allows you to change the burn speed for CD media. Use the NO or ▼▲ buttons to move to the speed you want. Press YES to select the speed.
DVD Write
This menu item allows you to change the burn speed for DVD media.
Ask Quantity
With this option turned on, you will be asked to specify the number of discs you want to burn, with a limit of 100 discs.
Use the ▼▲ buttons to change the number in the current column up or down. YES will move you one column to the right, NO will move you 1 column to the left. Press YES when in the right column to save the number of copies entered. The example to the right shows that 75 copies have been entered with the cursor currently in the right column (underlined).
QUANTITY? 075
Leaving the value at 000 will allow for any number of discs to be burned as if the Ask Quantity option were not turned on.
The Quantity option does not apply to Batch Mode duplication.
13