Maxell ZRY-316 manual Lock Parental Control Settings, Rating, Set Password, Area Code Country Code

Lock (Parental Control) Settings

Rating

Some movies contain scenes that may not be suit- able for children to view. Many of these discs contain parental control information that applies to the com- plete disc or to certain scenes on the disc. Movies and scenes are rated from 1 to 8, depending on the area (country). DVD video discs may or may not respond to the parental control setting if the Area code (Country code) of the disc is set wrongly. Some discs offer more suitable scenes as an alternative. Ratings are area (country) dependent. The parental control feature allows you to block access to scenes below the rating you input, thereby preventing your children from being able to view material you believe is unsuitable.

1.Select [Rating] option then press B.

2.To access the Rating, Password and Area Code (Country Code) features, you must input the 4-digit security code you created.

If you have not yet entered a security code you are prompted to do so. Input a 4-digit code and press ENTER. Enter it again and press ENTER to verify. If you make a mistake before pressing ENTER, press b .

3.Select a rating from 1 to 8 using the v / V buttons.

[1]-[8] :Rating one (1) has the most restrictions and rating eight (8) is the least restrictive.

[No Limit] : If you select [No Limit], parental control is not active and the disc plays in full.

4.Press ENTER to confirm your rating selection, then press SETUP to exit the menu.

5.Press OPEN/CLOSE (Z) to activate parental control.

Note:

If you set a rating for the recorder, all disc scenes with the same rating or lower are played. Higher rated scenes are not played unless an alternate scene is available on the disc. The alternative must have the same rating or a lower one. If no suitable alternative is found, playback stops. You must enter the 4-digit password or change the rating level in order to play the disc.

Set Password

You can enter or change password.

1. Select [Set Password] option then press B.

2.Follow step 2 as shown [Rating].

To change the password, select the [Change], press ENTER and input the new 4-digit code then press ENTER.

Input it again to verify.

3.Press SETUP to exit the menu.

If you forget your password

If you forget your password you can clear it using the following steps:

1.Press SETUP to display the Setup menu.

2.Input the 6-digit number [210499]. The message appears, select [Yes] then press ENTER. The security code is cleared.

3.Enter a new code as described above.

Area Code (Country Code)

Enter the Area Code (Country Code) whose stan- dards were used to rate the DVD video disc, based on the list in the reference chapter (see page 46).

1.Select [Area Code] option then press B.

2.Follow step 2 as shown [Rating].

3.Select the first character using v / V buttons.

4.Shift the cursor using B buttons and select the second character using v / V buttons.

5.Press ENTER to confirm your area code selection, then press SETUP to exit the menu.

22