Maxell ZRY-316 manual Recording Settings, Disc Settings, Record Aspect

Recording Settings

Disc Record Mode

You can set the picture quality for recording;

XP (Excellent quality), SP (Standard quality), LP (Low quality), EP (Extend quality).

1.Select the [Disc Record Mode] option then press

B.

2.Use v / V to select a desired Disc Record Mode (XP, SP, LP or EP).

3.Press ENTER to confirm your selection, then press SETUP to exit the menu.

VCR Record Mode

You can set the picture quality for VCR recording; SP (Standard Play), SLP (Super Long Play).

Auto Chapter

During recording, chapter markers are added auto- matically at fixed intervals. You can set this interval to 5 minutes, 10 minutes or 15 minutes. To turn off auto- matic chapter marking, select [None].

Disc Settings

Initialize

If you load a completely blank disc, the [Initialize] menu will appear. Select [Yes] then press ENTER. The Recorder will initialize the disc.

DVD-R:The Recorder initializes the disc for Video mode. The recording mode will always be Video mode.

DVD-RW:The Initialize menu will appear. Select [VR Mode] or [Video Mode] then press ENTER. DVD+R / DVD+RW: The Recorder initializes the disc.

Also, you can reformat the DVD-RW/DVD+RW from the Setup menu as below.

Hookup and Settings

Record Aspect

When DVD recording, you can set the recording aspect ratio to suit the material you’re recording (16:9

or 4:3).

1. Select the [Initialize] option then press B. [Start] icon is highlighted.

2. Press ENTER.

• In case of DVD-RW, use b / B to select a desired Disc Initialize Mode (VR Mode or Video Mode) then press ENTER.

• In case of DVD+RW, use b / B to select [Yes], and press ENTER.

It takes a few moments to format the disc.

Caution:

If you want to change the disc format, everything recorded on the disc will be erased.

23