Uniden TRU 440 Series Using the Caller ID Message List, Calling a party from the Caller ID list

• You cannot make a

call from the Caller ID

list if your phone is

connected to a

Using the Caller ID Message List

Calling a party from the Caller ID list

From Standby mode

1)Press cid/>. The summary screen appears. The screen shows the number of new messages and the total number of messages.

2)Use the number keypad (2-9and 0), +, or - to view the Caller ID message list.

	private branch
	exchange (PBX).
•	When a long distance
	call has been set,
	“1” appears in
	the display.
•	If a call comes in via
	a telephone system

3) Press talk/flash. The displayed phone number dials automatically.

From Talk mode

1)Press talk/flash.

2)Press cid/>. The summary screen appears.

3)View the Caller ID message you want to dial.

4)Press select/ch. The displayed phone number will be dialed.

Talk 8002971023

that does not offer

Caller ID service, no

information is stored.

Long Distance calls and Area Code Setting/Cancellation

While the incoming Caller ID information is displayed, pressing *tone will place or remove the prefix “1” in the display to set the call for a long distance call, or pressing # will set or cancel an area code. (See page 16.)

Storing Caller ID messages in the Phonebook/RocketDial

Messages shown in the Caller ID list can be stored in the phonebook. Using the incoming call information (i.e., Caller ID list), the phone number of the party on the Caller ID list can be stored in memory.

1) When the phone is in the standby mode, while the incoming Caller ID information is displayed, press pb/rocket/<.

2) Press + or - to choose “Store in PB?” (Phonebook locations) or “Store in SD?” (RocketDial location). To cancel Storing, select “Cancel”.

[ 34 ] C A L L E R I D