Step 1Charging the Battery
INSTALL THE HANDSET BATTERY
Remove the cover.
Connect the battery pack connector with the correct polarity.
Replace the cover.
Step 2 Connecting
CONNECT TO A PHONE LINE
When the handset battery pack is fully charged, plug the telephone cord into the base unit and then into a telephone wall jack.
Your phone is set for tone dialing. If your local network requires pulse dialing, please see “Setting up the phone, Choose the dialing mode” in your owner’s manual.
TO SELECT CALLER ID OPTIONS
Press menu/mute.
Press + or - to move the pointer to “Caller ID Setup”, then press select/ch.
Press + or - to move the pointer to an option, then press select/ch.
Press + or - to change the option setting.
Press select/ch and return the handset to the base.
Q U I C K R E F E R
PLUG INTO AC POWER | Step 3 Setting up the Caller ID Options/Language |
|
Plug the AC adapter cord into the base unit and then to a 120V AC outlet.
Place the handset in the base .
| Note: Three Caller ID options are available: | |
Note: You must charge the battery pack continuous | Auto Talk, Caller ID on Call Waiting (CIDCW) | |
and Area Code. | ||
for |
TO CHOOSE THE LANGUAGE
Press menu/mute.
Press + or - to move the pointer to
“Language”, then press select/ch.
Press + or - to change the option setting.
Press select/ch and return the handset to the base.
E N C E G U I D E
Q U I C K R E F E R E N C E G U I D E [ 5 ]
