Hitachi DVRF7U Pausing / Resuming, Select the recording speed quality, Follows, Main # SAP # Mono

Recording the current channel you are watching

DVD-RAM DVD-RW DVD-R

1.Check the antenna cable is connected.

2.Check the remaining time of disc.

DVD-RAM/DVD-RW/DVD-R discs should be formatted in advance before beginning recording. Most new discs are sold unformatted. Make sure to format your unformatted discs before recording.

1	Press the OPEN/CLOSE button and place a
	recordable disc on the disc tray.
2	Press the DVD CHANNEL 34button to select the
	channel you want to record.
3	Press the REC MODE button on remote control, to
	select the recording speed (quality).
	• XP (High, approx. 1 hour) # SP (Standard, approx.

2 hours) # LP (Low, approx. 4 hours) # EP (Extended Play, approx 6 hours)

RAM VR 3/3 XP CH111

4 Press the REC button.

Press the STOP button to stop or finish a recording in

5 progress.

•The message “Updating the information of disc. Please wait for a moment”.

Pausing / Resuming

•Press the PAUSE button to pause a recording in progress.

•Press the PAUSE button again during pause to resume recording.

■ You can’t change the recording mode and channel

Note during recording.

■Recording will stop automatically if there is not enough space for recording.

■Up to 99 titles can be recorded onto a disc.

■If the power is interrupted due to a power failure or other reasons, the title being recorded will not be saved onto the disc.

■Recording will stop automatically if a copy protect- ed image is input.

■Do not use DVD-R authoring discs with this unit.

■To set a channel over 100, hold down the 100+ but- ton first:

Example: CH 100 # 100+1 (extended pressing) +

0 + 0
■ Pressing the AUDIO button on remote control dur-
ing MTS audio reception will switch the audio as	Recording
follows:
[MAIN] # [SAP] # [MONO]

^========}

■ The audio selected above will be recorded on disc. ■ If you change the sound setting while recording,

the recorded sound will also change.

English - 63