JVC LPT1056-001A manual PrecautionsConnections, Connecting to a TV, Basic connection AV, Tips

PrecautionsConnections

When the equipment is installed in a cabinet or a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm or more on both sides, on top and at the rear).

When discarding batteries, environmental problems must be considered and the local rules or laws governing the disposal of these batteries must be followed strictly.

Failure to heed the following precautions may result in damage to the unit, remote control or disc.

1.DO NOT place the unit —

—in an environment prone to extreme temperatures or humidity.

—in direct sunlight.

—in a dusty environment.

—in an environment where strong magnetic fields are generated.

—on a surface that is unstable or subject to vibration.

2.DO NOT block the unit’s ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.)

3.DO NOT place heavy objects on the unit or remote control.

4.DO NOT place anything which might spill on top of the unit or remote control.

(If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.)

5.DO NOT expose the apparatus to dripping or splashing.

6.DO NOT use this equipment in a bathroom or places with water. Also DO NOT place any containers filled with water or liquids (such as cosmetics or medicines, flower vases, potted plants, cups, etc.) on top of this unit.

7.DO NOT place any naked flame sources, such as lighted candles, on the apparatus.

8.AVOID violent shocks to the unit during transport.

Tips:

•Depending on your TV and other equipment there are various ways you can connect the player.

•Please refer to the manuals of your TV, VCR, stereo system or other devices as necessary for additional connection information.

Notes:

•The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. Position the units away from each other or turn off the unit after removing the disc.

•Make sure the DVD+VCR is connected directly to the TV and tune the TV to the correct video input channel.

•Do not connect the DVD+VCR’s AUDIO OUT jack to the phono in jack (record deck) of your audio system. Do not connect the DVD+VCR via another VCR. The DVD image could be distorted by the copy protection system.

Connecting to a TV

Make one of the following connections, depending on the capabilities of your existing equipment.

Basic connection (AV)

1.Connect the EURO AV1 AUDIO/VIDEO on the rear panel of this unit to the SCART input socket on the TV using a SCART lead (not supplied).

For TV without SCART, connect the yellow VIDEO OUT jack and DVD/VCR AUDIO OUT jacks of this unit to the TV.

2.Some TV broadcasters transmit encoded television signals which you can only see with a purchased or rented decoder. You can connect such a decoder (descrambler) to this unit.

Basic connection (RF)

1.Connect the RF antenna cable from your indoor/ outdoor antenna to AERIAL jack on the rear panel of this unit.

2.Connect the supplied RF antenna cable from the RF.OUT jack on the rear panel of this unit to your television’s Antenna Input.

Rear of TV

AERIAL	VIDEO IN	AUDIO INPUT		SCART INPUT
		L	R

Satellite or Set Top Box

Rear of this unit (Basic connection)

10