Basic connections
DVD/VCR TO TV CONNECTION
After you have connected the antenna to the DVD/VCR, you must connect the DVD/VCR to the TV.
Below are 3 common methods of connecting your DVD/VCR to a TV. Find the type of TV you are using and follow the connection diagram.
This DVD/VCR has a single 75 ohm output for connection to a TV. If your TV has separate VHF and UHF antenna inputs (numbers 2 and 3 below), use a splitter to connect the DVD/VCR to the TV for VHF and UHF reception.
TV
75 ohm Coaxial Cable (supplied)
Splitter
75 ohm Input 75/300 ohm outputs
75 ohm Coaxial Cable (not supplied) (supplied)
Splitter
75 ohm Input
300 ohm outputs
75 ohm Coaxial Cable (not supplied) (supplied)
VHF/UHF IN
TV
UHF
VHF
TV
UHF
VHF
NOTE: If a VHF or UHF antenna is used, set the TV/CATV menu option to the "TV" mode.
TV with single 75 ohm VHF/UHF antenna input
NOTE: If a VHF or UHF antenna is used, set the TV/CATV menu option to the "TV" mode.
TV with 300 ohm UHFand 75 ohm VHF antenna inputs
NOTE: If a VHF or UHF antenna is used, set the TV/CATV menu option to the "TV" mode.
TV with 300 ohm UHF and 300 ohm VHF antenna inputs
13