JVC LPT0674-001B manual Auto clock setting

WAIT 30 MINUTES! when the power switch is off, after the connections of the antenna and the power plug. Because the Auto Clock setting feature is activate.

After the clock is set automatically, you may have to set the Time Zone and Daylight Saving Time.

Press POWER to turn on the DVD/VCR after the Auto Clock operation completed.

• When shipped from factory, the AUTO CLOCK option is set to ON position.

• If you turn the DVD/VCR on during Auto Clock setting, the clock is not set.

• With cable box connection, if the Auto Clock Setting is unsuccessful, please select the PBS channel carrying the XDS information, then turn the DVD/VCR off. After 30 minutes, turn the DVD/VCR on, and if the clock is not set automatically, set the clock manually. (See page 23)

Canadian Viewers:

Please see note regarding the Auto Clock Setting option on page 55.

Time Zone setting (STANDARD TIME)

In the rare event that you live within broadcast range of two stations in two different time zones, the DVD/VCR may recognize the wrong station for the AUTO CLOCK set.

To correct the situation:

Preparation:

• Turn ON the TV.

• When a TV is connected with an audio/video cable, select the video input mode on the TV.

• When a TV is connected only with an antenna cable, set to the video channel 3 or 4. Then select VCR position with TV/VCR.

• Make sure the VCR mode has been selected. (Is the VCR indicator being light?) (see steps 1~2 on page 18)

Auto clock setting

The Auto Clock feature enables the automatic clock setting and updating, and also to set the Time Zone

and Daylight Saving Time by receiving XDS (Extended Data Service) information carried on the channel
signal.	Preparation:
	• You must set the antenna connection before the AC cord plug is
	inserted into the AC outlet.
	• Make sure the AUTO CH MEMORY(on P.19) is done.

TV VCR DVD POWER Auto clock setting

DVD MENU	MARKER	RETURN	OPEN/
			CLOSE
DISPLAY	A.TRK	C.RESET	ZERO RETURN
	SUB TITLE	ANGLE	SEARCH
			MODE
SP/EP
PLAY	ZOOM	TITLE	REPEAT
MODE			A-B

							TV
							POWER
							INPUT
							TV VOL
0	TIMER				TV/VCR
EW				PLAY					FF
R
C				STOP			PA	U
RE
									SE
			/VCR		CH
SKIP		TV				+	SKIP
/INDEX							/INDEX
SET			ENTER/				SET
			SELECT
SET UP							CANCEL
MENU
		T				—
					H
			V/VCR C
OSD					SLOW		SKIP
	A.	MONITOR					SEARCH

VCR/DVD/TV

NOTE:

•After Auto Clock setting, in some case the clock may display the other time zone’s. You can correct the clock by selecting your Time Zone setting above.

•When the clock is not set or you set the clock manually, Time Zone setting

is not available.

1 Press SETUP MENU. The VCR menu screen will appear. Press or to select the SYSTEM SET UP menu, then press ENTER.

2	Press	or	to select the	SYSTEM SET UP
	“STANDARD TIME” option, then
					CLOCK SET
	press ENTER.				LANGUAGE/IDIOMA/LANGUE
					NO NOISE BACKGROUND
					AUTO CLOCK	ON	OFF
						ON	OFF
					STANDARD TIME
					DAYLIGHT SAVING TIME
					〈+/-/ENTER/MENU〉
3	Press	or	to select your Time	STANDARD TIME
	Zone, then press the ENTER.
					ATLANTIC	EASTERN
					CENTRAL	MOUNTAIN
					PACIFIC	ALASKA
					HAWAII
					AUTO

〈+/-/ENTER/MENU〉

4 Press SETUP MENU until the MENU screen is cleared.

21