JVC LPT0674-001B Tuner Setting, TV/CATV Selection, Setting channels automatically, Preparation

Tuner Setting

This DVD/VCR is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the DVD/VCR’s memory. In addition to normal VHF and UHF channels, this DVD/ VCR can receive up to 113 Cable TV channels. To use this DVD/VCR with an antenna, set the TV/CATV menu option to the TV mode. When shipped from the factory, this menu option is in the CATV mode.

TV VCR DVD POWER

Preparation:

•Turn ON the TV and set it to the video input mode.

•Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then press VCR to select the VCR mode. (The VCR indicator will light)

DVD MENU	MARKER	RETURN	OPEN/
			CLOSE
DISPLAY	A.TRK	C.RESET	ZERO RETURN
	SUB TITLE	ANGLE	SEARCH
			MODE
SP/EP
PLAY	ZOOM	TITLE	REPEAT
MODE			A-B

							TV
							POWER
							INPUT
							TV VOL
0	TIMER				TV/VCR
REW				PLAY			FF
REC				STOP			PAUSE
			/VCR		CH
SKIP		TV				+	SKIP
/INDEX							/INDEX
SET			ENTER/				SET
			SELECT
SET UP							CANCEL
MENU
		T				—
					H
			V/VCR C
OSD					SLOW		SKIP
	A.	MONITOR					SEARCH

TV/CATV Selection

1 Press SETUP MENU. The VCR menu screen will appear.
	Press		or	to select CH SET UP, then press ENTER.
2	Press		or	to select the “TV/	CH SET UP
	CATV” option.
						TV CATV
						AUTO CH MEMORY
						ADD/DELETE
					〈+/-/ENTER/MENU〉
	Then press ENTER to select the				CH SET UP
3 TV or CATV mode. The arrow
						TV CATV
	indicates the selected mode.
						AUTO CH MEMORY
						ADD/DELETE
		TV	- VHF/UHF channels		〈+/-/ENTER/MENU〉
		CATV - CABLE TV channels
4 Press SETUP MENU until the menu screen is cleared.

Setting channels automatically

The VCR can receive a maximum of 181 channels by presetting the channels into memory.

VCR/DVD/TV

NOTE:

You can not select "CH SET UP" if you set the channel to "L".

1

2

Repeat above step 1 and press or to select AUTO CH

MEMORY.

Then press ENTER.

The auto tuning will start. The channel display will count up and when finished, the screen returns to normal.

CH SET UP

TV CATV

AUTO CH MEMORY

ADD/DELETE

〈+/-/ENTER/MENU〉

CH 002

19