Magnavox ZV427MG9 A owner manual Connection, Connecting to a TV with an Hdmi Compatible Port

Page 18

CONNECTION

Connecting to a TV with an HDMI™ Compatible Port

•HDMI outputs the video / audio signals without converting to analog signals.

•No audio connection is required.

HDMI OUT

HDMI cable

HDMI IN

rear of this unit

Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and the connector are matched.

Cables not included.

Please purchase the necessary cables at your local store.

HDMI Mode and Actual Output Signals

Press [HDMI] to select the HDMI output mode. The output mode changes as follows every time [HDMI] is pressed.

Front Panel Display Video Output Signal

480 Progressive

Press [HDMI]

720 Progressive

Press [HDMI]

1080 interlaced

Press [HDMI]

1080 Progressive

Press [HDMI]

• The HDMI mode that is not supported by display device will be skipped.

Copyright protection system

To play back the digital video images of a DVD via an HDMI connection, it is necessary that both the player and the display device (or an AV amplifier) support a copyright protection system called HDCP (high-bandwidth digital content protection system). HDCP is copy protection technology that comprises data encryption and authentication of the connected AV device. This unit supports HDCP. Please read the operating instructions of your display device (or AV amplifier) for more information.

Note for HDMI Connection

•Because HDMI is an evolving technology, it is possible that some devices with an HDMI input may not operate properly with this unit.

•When using an HDCP-incompatible display device, the image will not be viewed properly.

•Among the devices that support HDMI, some devices can control other devices via the HDMI connector; however, this unit cannot be controlled by another device via the HDMI connector.

•When this unit’s HDMI connector is connected to a DVI-D compatible monitor (HDCP compatible) with an HDMI-DVI converter cable, the signals are output in digital RGB.

•When the power failure occurs, or when you unplug the unit, some problems in the HDMI setting might occur. Please check and set the HDMI setting again.

16 EN

Image 18

Contents ZV427MG9 a Press REC Mode repeatedly to select a recording mode Press DVD firstPress Stop C to stop recording Video cable Supports only 480i resolutionAudio cable Hdmi cable not includedSafety Information Do not OpenTo Avoid the Hazards of Electrical Shock and Fire Safety InformationAvoid a place with drastic temperature changes Location and HandlingAuto head cleaning Supplied AccessoriesCleaning the disc lens Disc handling Maintenance ServicingTrademark Information Dolby Digital RecordingContents Contents Features Features Symbol DescriptionDescription refers to DVD+RW Description refers to DVD-RW Functional Overview Front Panel 21 2019 1813 12 11 10 3 9 8 7 6 5 4 Functional OverviewRear Panel Introduction ConnectionsClose the cover Remote ControlOpen the cover Insert batteries 1718VCR mode Setup button DVD/VCRREW E button DVD/VCR DVD mode REC Mode button DVD/VCRCurrent status of the unit Front Panel DisplayDisplay Message Displays the followingTV Connection Overview Connecting to an External TunerConnection Supplied cables used in this connection are as followsConnection Connecting to a TV with an Hdmi Compatible PortHdmi Mode and Actual Output Signals Cables not includedConnecting to a TV with Component Video Input jacks Connecting to a TV with an S-Video Input JackConnecting to a TV with Audio / Video Input Jacks Connecting to a TV without Audio / Video Input JacksAudio format disc Digital Audio ConnectionActual Output Digital OutputFinding the Viewing Channel on Your TV Setting onBefore YOU Start Turn on your TVBefore YOU Start Guide to On-Screen Display / MenuFile Name Information VCR modeTitle Name Information First, track name will be displayedMain Menu How to Insert a Disc Switching DVD / VCR ModeHow to Insert a Disc / Cassette Tape How to Insert a Cassette TapeInitial Setting Proceed toPress Setup to exit Setting the ClockContents Use K / L to select Clock, thenRecordable Discs Recording ModeInformation on DVD Recording Unrecordable DiscsPress Setup to exit Setting for Auto ChapterPress Setup and use K / L to select General Before RecordingSelect a recording mode On how to insert a discPress REC Mode repeatedly to Press DVD firstPress Stop C to exit the title list Press REC repeatedly until the desired length appearTimer Recording Press Timer Use K / L to select New Program, then press OKUse K / L to enter the date, then press B Recording to DVD Timer RecordingPress Timer SET to set a timer programming This unit waits to make the recordingTo stop the timer recording in progress Press Timer SET Check the informationHints for Timer Recording Priority of Overlapped SettingsSatellite Link Use K / L to set the desired starting time, then press BRefer to page 27 for details Satellite Link To Standby Mode is highlightedPress Timer SET to turn on the unit Press OK againTitle Overwriting Unnecessary TitleOverwriting from the Beginning Overwriting in the Middle of the TitleOverwrite recording a Existing title B After overwriting Overwriting Unnecessary TitleHints for Overwriting Overwrite recording a Existing title B Existing title CPress Setup and use K / L to Settings for AN External DeviceSetting for the Video Input Use K / L to select Video, then Press Setup to exitRecording from an External Device Settings for AN External DevicePress REC Mode repeatedly to Select a recording mode Press VCRUse K / L to select Dubbing Mode, then press OK BI-DIRECTIONAL DubbingUse K / L to select Recording, then press OK Preparing for dubbing cassette tape to DVDBI-DIRECTIONAL Dubbing Use K / L to select Disc Protect Setting a Disc to ProtectPress Setup OFF ON, then press OKFinalizing is completed Press Setup Use K / L to select Disc Edit, then press OKFinalizing a Disc Disc Edit menu will appearPlaying the Discs on Other DVD Players Auto FinalizingUnplayable Discs Information on PlaybackPlayable Discs and Files Color SystemsPBC playback control for Video CD Disc Playback Mode menu will appearInformation on Playback Hint for DVD PlaybackPress Play B to start playback Basic PlaybackDirect Playback Press Stop C once to stop playback temporarilyBasic Playback Playback from the Title ListThen press OK Hints for audio CD tracks and MP3 / Jpeg files When selecting track/fileWhen selecting the folder Not available for audio CD MP3Using the Title / Disc Menu PauseSkipping TV Commercials During Playback Special PlaybackResume Playback Fast Forward / Fast Reverse PlaybackSlow Forward / Slow Reverse Playback Special PlaybackStep by Step Playback ZoomMarker Setting Repeat PlaybackRandom Playback Slide ShowProgram Playback Search Using H / GUsing Display Title / Chapter SearchAudio CD SearchTime Search To move to the number next to , Press BSwitching Subtitles Switching Audio SoundtrackFor DVD-video Audio soundtrack will switch Selecting the Format of Audio and Video Switching Virtual Surround SystemSwitching Camera Angles Reducing Block NoiseEditing Discs Information on Disc EditingGuide to a Title List Press DVD, then press TitleUse K / L to select Title Delete, then press OK Editing DiscsDeleting a Title Select Yes, then pressAfter this operation is completed, press Return to exit Editing DiscsPutting Names on Titles Guide to Edit Title NameSetting Chapter Marks Use K / L to select Add, then press OKSubmenu will appear Chapter mark number is displayed on the preview screen DVD Clearing Chapter MarksPress Return twice to exit Selected chapter mark will be deletedFollow steps 1 to 3 in Deleting a Clearing Chapter Marks cont’dTo delete all chapter marks Use K / L to select Delete AllHiding Chapters Chapter is now hiddenSetting Pictures for Thumbnails Press Return to exitPicture for thumbnail will be set Use H, G, E, D, Pause Dividing a TitleTitle on page 61 to display Edit At which you will divide the titleUse K / L to select Edit Disc When you finish entering a title name, pressPutting Name on Disc Window for entering a title name will appearContents of the disc is now deleted Erasing DiscMaking Edits Compatible List of Settings ContentsList of Settings RGBUse K / L to select Playback, then press OK SetupsPlayback Use K / L to select a desired item, then press OKPlayback cont’d SetupsParental Lock Default OFF YesSubtitle Language Default OFF Disc Menu Language Default EnglishAudio Language Default Original Angle Icon Default onDisplay When you finish with setting, pressSetup to exit Use K / L to select a desired itemFL Dimmer Default Bright Display cont’dChip Use the Number Buttons to enter new access password Canadian French RatingVideo Progressive Scan Default OFFTV Aspect Default 43 Letter Box Refer to 1 to 2 on this page and setHdmi Audio Default on When you finish with the setting, press Setup to exitFormat Default RGB RGB Range Default NormalReset the setting to default Reset AllSelect Yes again using K / L , then press OK Your setting in recording will be initializedVCR Functions Select the recording mode using REC ModeRecording mode Information on VCR FunctionsVCR Functions One-touch Timer Recording OTRYou cannot pause the one-touch timer recording Index SearchOther Operations Troubleshooting RemedyTroubleshooting Symptom RemedyPress OPEN/CLOSE a OPEN/CLOSE a to take out the disc. The disc canceled duringRepairing process MAY not work RECDisc Error message Cause Solution Language Code Language CodeGlossary Recording SpecificationsGeneral TerminalsDisco Grabable EspañolDiscos Reproducibles Disco no GrabableConexión a un Televisor con un Puerto Compatible con Hdmi EspañolConexión Básica Modo Hdmi y señales efectivas de salidaOPEN/CLOSE a para cerrar la bandeja de discos Presione STANDBY-ON yPresione OK para activar Ajste Manual de Reloj Para seleccionar un modo deNuevo, y luego presione OK Presione TimerConfigure una programación del TemporizadorMemo Customer Service Tel1VMN27077