Magnavox ZV427MG9 A Timer Recording, Press Timer SET to set a timer programming, Recording to DVD

TIMER RECORDING

4Use [K / L / s / B] or [the Number buttons] to enter the start and end time, then press [B].

Date	Start			End
JAN/02	12	: 00AM		- - : - -
L1/L2	REC To		Mode
L1	DVD			SP
			SP	2h00m

•You cannot make a program which recording time exceeds 12 hours.

5Use [K / L] to select the appropriate external input position (L1 / L2) to which your external tuner is connected, then press [B].

Date	Start		End
JAN/02	12 : 00AM	1 : 00AM
L1/L2	REC To	Mode
L1	DVD		SP
		SP	1h00m

6Use [K / L] to select the recording media (“DVD” or “VCR”), then press[B].

e.g.) recording to DVD

Date	Start		End
JAN/02	12 : 00AM	1 : 00AM
L1/L2	REC To	Mode
L1	DVD		SP
		SP	1h00m

7Use [K / L] to select a recording mode.EndDate StartJAN/02 12 : 00AM 1 : 00AM

L1/L2	REC To	Mode
L1	DVD	SP

SP 1h00m

Refer to “Recording Mode” on page 27.

•When recording to DVD, you can check the remaining recordable space of the disc when you select the recording mode.

Date	Start		End
JAN/02	12 : 00AM	1 : 00AM
L1/L2	REC To	Mode
L1	DVD		SP
		SP	1h00m

Auto recording mode select (DVD only)...

When “Auto” is selected as a recording mode, the unit calculates how much time is available on the disc and selects the best recording mode available automatically to complete recording the program.

Date	Start	End
JAN/02	12 : 00AM	1 : 00AM
L1/L2	REC To	Mode
L1	DVD	Auto
		Auto	1h00m

•“Auto” is only available for one program in the timer program list.

•The recording may be cut short when the available recording space of the disc is too limited.

8 Press [OK] when all items are entered. After displaying an instructive message for 10 seconds, timer program list will appear.

Press TIMER SET to Timer Standby mode.

When Timer set on DVD or VCR,

it is not available in the standby mode.

Press TIMER SET to cancel the Standby mode.

Timer Programming

JAN/ 2/09 12:00 AM L1 SP
SP (1:00)		THU JAN/01 11:00AM
Date	Start	End	L1/L2
JAN/02	12:00AM	1:00AM	L1

Your program setting is now stored.

•To set another program, repeat steps 2 to 8.

•To exit, press [TIMER] or [SETUP].

•When 2 or more programs are overlapped, “Timer program overlapped” appears, and the overlapped program will be displayed in blue.

•To correct the timer program refer to “Checking, canceling, or correcting the timer programming information” on page 33.

Press [TIMER SET] to set a timer programming.

9		will appear on the front panel display, while
	this unit waits to make the recording.
		CS DR	CD
			HDD
			DVD

“VCR” will appear on the front panel display if VCR timer recording have been set.

32 EN