Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
| Symptom | Cause | Correction | |
|
|
|
| |
No power. | z The power cord is disconnected. | z Plug the power cord into the wall | ||
|
|
| outlet securely. | |
|
|
| ||
The power is on, but | z DVD or VCR button is not switched | z Refer to page 7. | ||
the DVD+VCR does | properly. |
| ||
not work. |
|
| ||
z No disc is inserted. | z Insert a disc or tape. (Check that | |||
|
| |||
|
| z No tape is inserted. | the disc or tape indicator in the dis- | |
|
| play window is lit.) | ||
|
|
| ||
No picture. | z The TV is not set to receive DVD + | z Select the appropriate video input | ||
|
| VCR signal output. | mode on the TV so the picture from | |
|
|
| the DVD+VCR player appears on | |
|
|
| the TV screen. | |
|
|
|
| |
|
| z The video cable is not connected | z Connect the video cable into the | |
|
| securely. | jacks securely. | |
|
|
|
| |
|
| z Wrong connection. | z Check the connection. | |
|
|
| ||
No sound. | z The equipment connected with the | z Select the correct input mode of | ||
|
| audio cable is not set to receive | the audio receiver so you can listen | |
|
| DVD+VCR signal output. | to the sound from the DVD+VCR. | |
|
|
|
| |
|
| z The audio cables are not connected | z Connect the audio cable into the | |
|
| securely. | jacks securely. | |
|
|
|
| |
|
| z The power of the equipment connect- | z Turn on the equipment connected | |
|
| ed with the audio cable is turned off. | with the audio cable. | |
|
|
|
| |
|
| z The AUDIO options are set to the | z Set the AUDIO options to the cor- | |
|
| wrong position. | rect position. | |
|
|
| ||
The playback picture | z The disc is dirty. | z Clean the disc. | ||
is poor. |
|
| ||
z The TV channels are not tuned in | z Check tuning, carry out tuning | |||
|
| |||
|
| properly. | again. | |
|
|
|
| |
|
| z Tape heads are dirty. | z Clean video heads. | |
|
|
|
| |
|
| z Tape is a rental or was recorded on | z Use CH | |
|
| another VCR. | adjustment while tape is playing. | |
|
|
|
| |
|
| z This unit can only output 525p | z Make sure that your TV can sup- | |
|
| Progressive scan picture. | port 525p Progressive scan picture | |
|
|
| or set Progressive scan to off. | |
|
|
| ||
The “PROGRESSIVE | z DVD+VCR was turned off while set- | z Keep pressing STOP (x) for more | ||
SCAN MODE” | ting the Progressive scan mode. | than 5 seconds. | ||
message remains to | z The Progressive Scan is set to On on |
| ||
be displayed. |
| |||
the setup menu but is connected to a |
| |||
|
|
| ||
|
| standard(analog) television with com- |
| |
|
| ponent video input. |
| |
|
|
|
| |
36