JVC HR-XVC18BUS manual Regional Code, About the Remote Control, Selecting the Viewing Source

Page 7

Regional Code

This DVD+VCR is designed

and manufactured for playback 1 ALL of region “1” encoded DVD

software. This unit can play

only DVD discs labeled “1” or “ALL”.

Notes on Regional Codes

Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number must match your DVD+VCR’s regional code or the disc cannot play.

If you try to play a DVD with a different region code from your player, the message “Check Regional Code” appears on the TV screen.

Notes on Copyrights:

It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copy- righted material without permission.

This product features the copy protection function developed by Macrovision. Copy protection sig- nals are recorded on some discs. When recording and playing the pictures of these discs picture noise will appear. This product incorporates copy- right protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be author- ized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Notice for Progressive Scan Use

CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DIS- PLAYED IN THE PICTURE. IN CASE OF 525 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE ‘STAN- DARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COM- PATIBILITY WITH THIS MODEL 525p DVD+VCR, PLEASE CONTACT OUR CUS- TOMER SERVICE CENTER.

About the Remote Control

Operation Range

Point the Remote Control at the remote sensor and press the buttons.

Distance: About 23 ft (7 m) from the front of the remote sensor.

Angle: About 30° in each direction of the front of the remote sensor.

Battery installation

Detach the battery cover on the rear of the Remote Control, and insert two (R03/AAA) size batteries with 3 and # aligned correctly.

Do not mix old and new batteries and never mix different types of batteries such as standard, alkaline, etc.

Selecting the Viewing Source

You must select one of your output sources (DVD or VCR) to view on the TV screen.

If you want to view DVD deck output source:

Press DVD until DVD indicator in the display window lights and output source of DVD deck is viewed on the TV screen.

If you want to view VCR deck output source:

Press VCR until VCR indicator in the display window lights and output source of VCR deck is viewed on the TV screen.

Notes:

If you insert a disc while the DVD+VCR is in the VCR mode, the DVD+VCR will switch to DVD mode automatically.

If you insert a cassette tape without prevention tab while the DVD+VCR is in the DVD mode, the DVD+VCR will switch to VCR mode automatically.

To selecting and viewing the E to E sources (tuner, line1, line2), the unit must be in VCR mode.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Labora- tories.

DTS and DTS Digital Out are trademarks of Digital Theater Systems, Inc.

This model is equipped with SQPB (S-VHS QUASI PLAYBACK) that makes it possible to play back S-VHS recordings with regu- lar VHS resolution.

Introduction

7

Image 7
Contents HR-XVC18BUS HR-XVC19SUS Serial Number Important Safety Instructions Reference About the Symbol Display Symbols Used in this ManualMoisture Condensation Disc-related terms Types of Playable DiscsJpeg Selecting the Viewing Source About the Remote ControlBattery installation Regional CodeVCR Front PanelREC REW m/FF M Remote ControlDVD/VCR OUT VIDEO/AUDIO Rear PanelDVD OUT Antenna Connecting an Antenna or Cable TVTo view or record a Catv channel when using cable box Basic TV ConnectionsAudio Connection for DVD Optional TV ConnectionsDigital Multi-channel sound Connecting External Audio/Video A/V source to DVD+VCRProgram Initial Settings VCRGeneral Operation ClockTo Add or Erase Channels TuningSetup Auto Channel ProgrammingDisc Audio / Subtitle / Menu DVD Initial Settings DVDLanguage Menu LanguageProgressive Scan DVD Display Mode DVDDisplay TV Aspect DVDDRC Dynamic Range Control DVD AudioDolby Digital / DTS / Mpeg DVD Sample Freq. Frequency DVDAuto Play DVD OthersE. Black Level Expansion VCR Tape Playback Hi-Fi Stereo Audio Sound VHS Hi-Fi Stereo / MTS BroadcastSlow Motion CM Skip Commercial SkipTo pause the recording VCR Tape RecordingTo record one TV program while watching another Program Priority Checking or Erasing the Timer ProgramExtending the Recording Time Checking the Recording TimeCopying from DVD to VCR On-Screen Display VCREasy Information Additional VCR InformationVCR Auto Play System VHS Quasi Playback SqpbGeneral Features Playback SetupPlaying a DVD or Video CD Repeat DVD VCD Search DVD VCDTime Search DVD VCD Marker Search DVD VCDSpecial DVD Features On-Screen Display DVD Maintenance and ServiceExample On-Screen Display during playing DVD Video Items Moving to another Track CD Audio CD Disc FeaturesPlaying an Audio CD Disc Pause CDRepeat A-B CD Programmed PlaybackSearch CD Random CDErasing a Track from Program List Repeat Programmed TracksErasing the Complete Program List Viewing a Jpeg Disc Reference Symptom Cause Correction TroubleshootingDVD+VCR General SpecificationsVCR Specifications DVD SpecificationsWarranty Only in U.S.A HR-XVC18BUS/HR-XVC19SUS