24 EN | INITIAL SETTINGS (cont.) |
Tuner Set
●Turn on the TV and select the VCR channel (or AV mode).
●Slide the TV/VCR/DVD switch on the Remote to the right.
Slide to the
Auto Channel Set
Perform Auto Channel Set only if channels have not been set correctly by the Plug&Play setting.
A Turn on the unit.
Press POWER.
B Select the VCR deck.
On the unit
right.
POWER
Press VCR/DVD repeatedly so that the VHS indicator lights up on the front display panel.
On the Remote
Press VCR so that the VHS indicator lights up on the front display panel.
C Access the Main Menu screen.
Press SET UP.
D Access the Tuner Set screen.
Press rt to move the highlight bar (arrow) to “TUNER SET,” then press ENTER or e.
E Perform Auto Channel Set.
INFORMATION
The unit selects the correct band (TV or CATV) automatically during Auto Channel Set. The selected band will be displayed on the right side of “BAND” on the Tuner Set screen.
Press rt to move the highlight bar (arrow) to “AUTO CHANNEL SET,” then press ENTER or e. You can automatically set the receivable channels in your area in the order of their frequencies.
● As Auto Set Up progresses, the “q” mark on the TV screen moves from left to right.
● When Auto Channel Set is
complete, “SCAN |
| |
COMPLETED” appears on the | ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ – – – – – – – | |
TV screen. | ||
|
●If the scan was unsuccessful,
“SCAN
F Return to the normal screen.
Press SET UP.