System Setting 21
Auto Set Up |
|
[Manual] |
After the POWER is pressed for the first time to turn on the unit or after resetting the unit, the Initial Setup Wizard function sets the language, tuner channels and clock automatically.
1.Select a language for the Setup menu and onscreen display. Use s/wto select a language then press ENTER (b).
Press RETURN (x) to skip the Initial Setup.
2.Check your antenna connections. Press ENTER (b) to move next step.
Press ato go back to the previous level.
3.Use s/w to select the clock Set option then press ENTER (b).
[Auto]
When Channel auto search is completed the actual Time and Date are also set automatically. (See “Auto Clock Set” on page 25)
Enter the necessary information for year, date and time.
a/d(left/right): Moves the cursor to the previous or next column.
s/w(up/down): Changes the setting at the current cursor position.
Press ENTER (b) to confirm your setting.
4. Use s/w to select a country then press d.
Use s/wto select the [Digital], [Analog] or [All] and press d.
5. Press ENTER (b) to begin the channel search.
6. Press ENTER (b) to exit the menu.
,,Note
You can reset the Initial Setup Wizard from the [Factory Set] in the setup menu. (see page 26).
3
System Setting