5
Troubleshooting
62Troubleshooting
Troubleshooting
General
Symptom | Cause & Solution |
|
|
The Power does not turned on. | yy Plug the power cord into the wall outlet securely. |
|
|
The unit does not start | yy Insert a playable disc. (Check the disc type, color system, and regional |
playback. | code.) |
| yy Place the disc with the playback side down. |
| yy Place the disc on the disc tray correctly inside the guide. |
| yy Clean the disc. |
| yy Cancel the Rating function or change the rating level. |
|
|
The angle cannot be changed. | yy |
| yy The angle cannot be changed for the titles recorded on this unit. |
|
|
Cannot play movie, photo or | yy The files are not recorded in a format that the unit can play. |
audio files. | yy The unit does not support the codec of the movie file. |
| |
|
|
The channel is not found or | yy Check your antenna connection. |
stored. |
|
|
|
The remote control does not | yy The remote control is not pointed at the remote sensor of the unit. |
work properly. | yy The remote control is too far from the unit. |
| |
| yy There is an obstacle in the path between the remote control and the |
| unit. |
| yy The batteries in the remote control are exhausted. |
| yy The remote’s manufacturer code returned to the default setting when |
| you replaced the batteries. Reset the code (page 65). |
|
|
Resetting the unit |
|
Symptom | Cause & Solution |
|
|
If you observe any of the | yy The unit is plugged in, but the power will not turn on or off. |
following symptoms. | yy The front panel display is not working. |
| |
| yy The unit is not operating normally. |
|
|
You can reset the unit as | yy Press and hold the POWER (1) button for at least five seconds. This |
follows. | will force the unit to power off then turn the unit back on. |
| yy Unplug the power cord, wait at least five seconds, and then plug it in |
| again. |
|
|