LG Electronics XBR446 guide

Before Operation (Continued)

General Explanation of

On-Screen Display

This manual gives basic instructions for operating the VCR/DVD Recorder. Some DVDs require specific oper- ation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the VCR/DVD Recorder or is not available on the disc.

Displaying Information on-screen

You can display various information about the disc or tape loaded on-screen.

On-screen display operation

1	Press DISPLAY repeatedly to	display/change the
	information displayed on-screen.
2	To remove the on-screen display, press DIS-
	PLAY or RETURN (O) repeatedly until it disap-

pears.

See the descriptions on pages 30 and 31 for detailed explanations of on-screen displays for each media type.

otes

Some discs may not provide all the features shown in the on-screen display examples.

The on-screen display disappears automatically if no button is pressed for seven seconds.

Temporary Feedback Icons

Resume play from this point

Action prohibited or not available

Displaying OSD While Watching TV

While watching TV, press DISPLAY to display/ remove the on-screen display.

For example, when a DVD-RW in VR mode is inserted, you would see a screen similar to the following:

Indicates disc type.				Indicates channel
Indicates disc type.				number and
				number and
Indicates the Recording mode,					audio input
Indicates the Recording mode,					audio input
free space, and elapsed time				signal received
		progress bar.		by the tuner.

	DVD-VR			DVD
	VR Mode		SP 1H 32M Free	Ch. 6

MONO

Mono		10/08/2004 11:35AM

Indicates output audio signal.

Indicates current date and time.

Changing TV Channels

If no disc is playing, you can change TV channels using the number or CH/TRK (v / V) buttons on the Remote Control, or the CH (v / V) buttons on the front panel.

ote

Antenna channels are numbered 2 through 69. Cable channels are numbered 1 through 125.

Changing TV Audio Channel

Some TV programs are broadcast with both a main and a Secondary Audio Program (SAP). You can change the TV audio using the AUDIO button.

Press AUDIO repeatedly to change the TV audio, according to Broadcast audio signal as shown below.

•STEREO+SAP Audio Signal Stereo → SAP → Mono → Stereo

•STEREO Audio Signal

Stereo → L → R → Mono → Stereo

•SAP Audio Signal Mono → SAP → Mono

•MONO Audio Signal Mono

The current audio channel is displayed on-screen.

•If SAP is selected, but there is no SAP channel being broadcast, you will still hear the main audio (Mono or Stereo) channel.

•If the sound is poor quality when set to Stereo, you can often improve it by changing to Mono.

•When an external input is selected, the audio channel can be switched only to Stereo.

DVR HOOKUP