Daewoo SH-9840P More Functions, Clock / counter display, Remaining time and cassette length

More Functions

■The counter counts in real time from the point you load the cassette. This does not have to be its beginning! The counter does not count unrecorded parts of the tape.

■If you rewind beyond the zero position, the counter counts in negative values (e.g. – 0:01:15).

Clock / counter display

Each time you press [DISPLAY] button,

1x: Time and date+current status ➝ Time and date

2x: Counter+current status ➝ counter

3x: disappear.

STOP SP	PR01 BBC1
	STEREO ON

14:00 08/08 V E180 00:48

•If the tape is not wound (PLAY, FF, REW,...), the tape remaining time does not appear.

•If the timer recording information is contained within the received broadcast signal , press the button to display the VPS/PDC icon within the received broadcast signal.

Remaining time and cassette length

TAPE CONTROL		TAPE REMAIN
TAPE REMAIN		E-180
GO TO ZERO
		E-240
COUNTER RESET
INDEX+		E-300
INDEX-		PR+/-:SELECT
PR+/-:SELECT				E-240 01:27
OK:CONFIRM	SETUP:END	OK:CONFIRM	SETUP:END

Call up the player’s "SETUP" menu,choose "TAPE CONTROL".

•Remaining time display is only possible when the cassette is loaded.

VCR Operation

When you want the player to show the time remaining from the current player tape position (to find out if there is sufficient space for a recording, for example).

To ensure the remaining time shown is accurate, select from the list given in the menu the cassette tape length currently being used.

Searching a recorded programme with index

When you record a programme, the VCR places an index mark at the start of the recording.

To search fo an index mark

1.Call up the player’s "SETUP" menu, choose "TAPE CONTROL"

2.Choose index + to search forward or index - to search backward. The VCR will locate your index mark and begin playback.

TAPE CONTROL

TAPE REMAIN

GO TO ZERO COUNTER RESET

INDEX+ INDEX-

PR+/- :SELECT

OK:CONFIRM SETUP:END

29