FUNAI DV220TT8 owner manual Location and Handling, Avoid the Hazards of Electrical Shock and Fire

Page 4

PRECAUTIONS

Location and Handling

Do not stand this unit up vertically. Install this unit in a horizontal and stable position. Do not place anything directly on top of this unit. Do not place this unit directly on top of the TV.

Depending on the TV, noise or disturbance of the picture and/or sound may be generated if this unit is placed too close to your TV. In this case, please ensure enough space between your TV and this unit.

Do not cover or place this unit in enclosed spaces to prevent excessive temperature build up.

Do not place this unit in direct sunlight, or near heat sources.

Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.

Keep this unit away from strong magnetic objects.

Do not place any object containing water or other liquids on this unit. In the event that liquid should enter the cabinet, unplug this unit immediately and contact the retailer or an authorized service center immediately.

Do not remove this unit cabinet. Touching parts inside the cabinet could result in electric shock and/or damage to this unit. For service and adjustment inside the cabinet, call a qualified dealer or an authorized service center.

Be sure to remove disc and cassette tape and unplug the AC power cord from the output before carrying this unit.

Avoid the Hazards of Electrical Shock and Fire

Do not handle the power cord with wet hands.

Do not pull on the power cord when disconnecting it from AC outlet. Grasp it by the plug.

If, by accident, water is spilled on this unit, unplug the power cord immediately and take the unit to our authorized service center for servicing.

Do not put your fingers or objects into the unit cassette holder.

Moisture Condensation Warning

Moisture may form inside this unit under the following conditions:

Immediately after a heater is turned on.

In a steamy or humid room.

When this unit is suddenly moved from a cold to warm environ- ment.

If moisture forms inside this unit, it may not operate properly or damage the cassette tape. In such case, do not use this unit at least for 2 hours until its inside gets dry.

About Copyright

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

Notice for Progressive Scan Outputs

Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of picture problems with 525 progressive scan output, it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions regarding your TV set compatibility with this 525p DVD player, please contact our customer service center.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground should be connected to the grounding system of the building, as close to the point of cable entry as practical.

Symbols Used in this Manual

The following symbols appear in some headings in this manual. : Description refers to video cassette tapes.

: Description refers to DVD-video.

: Description refers to audio CD.

: Description refers to CD-RW/-R with MP3 files.

Maintenance

Servicing

Please refer to relevant topics on the “Troubleshooting Guide” on page 23 before returning the product.

If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug, and please call our toll free customer support line found on the cover of this manual to locate an authorized service center.

Cleaning the Cabinet

Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasive.

Cleaning Discs

When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a

circular motion.

Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or anti- static spray intended for analog records.

Cleaning the Disc Lens

If this unit continues to perform improperly even after you have referred to the relevant sections and to the “Troubleshooting Guide” in this manual, the laser optical pickup unit may be dirty. Consult your dealer or an authorized service center for inspection and cleaning of the laser optical pickup unit.

Disc Handling

When you handle a disc, hold it by its edge and try not to touch the surface of the disc.

Always store the disc in its protective case when not in use.

Auto Head Cleaning

Automatically cleans video heads as you insert or remove a cassette tape, so you can see a clear picture.

Playback picture may become blurred or interrupted while the TV program reception is clear. Dirt accumulated on the video heads after a long period of use, or the usage of rental or worn cassette tapes can cause this problem. If a streaky or snowy picture appears during playback, the video heads in your unit may need to be cleaned.

1.Please visit your local audio/video store and purchase a good quality VHS video head cleaner.

2.If a Video head cleaner does not solve the problem, please call our toll free customer support line found on the cover of this manual to locate an authorized service center.

Note:

Remember to read the instructions along with the video head cleaner before use.

Clean video heads only when problems occur.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

– 4 –

EN

Image 4
Contents Contents Supplied Accessories Basic TV Connection Laser Safety PrecautionsMake your contribution to the environment Important Safeguards Symbols Used in this Manual Maintenance ServicingCleaning the Cabinet Cleaning DiscsAbout Cassette Tapes and Discs Playable MediaUnplayable Discs Any other discs without compatibility indicationsSetup ConnectionsConnection to a TV Analog audio Standard picture Good pictureConnection to an Audio System Connection to a Cable/Satellite BoxClock Setting Ual refer to remote control usePreparation for Use Turning on Unit for the First TimeFront Panel Indicator Lights Function OverviewSelecting DVD or VCR Operation Front & Rear TerminalsRemote Control Installing the Batteries for the Remote ControlKeep in mind the following when using the remote control Either side of centerPlayback VCR FunctionsOther Operations Recording & One-touch Timer Recording OTR To stop recording temporarily Pause modeTimer Recording RecordingTo cancel a timer recording in progress To check, correct or cancel a timer programPress CLEAR/C.RESET to exit Satellite Link Make sure to turn off the tuner when you finish settingCopying a Cassette Tape DVD Functions MP3 Playback On-Screen DisplayUsing Track Search Using Time SearchUsing Title / Chapter Search Marker SettingRepeat / Random / Programmed Playback Repeat Playback Random PlaybackRepeat A-B Playback Programmed PlaybackSpecial Settings Language Setting P20 StepP21 Step Parental menuDisplay Setting Audio SettingDisplay menu Audio menuOthers Setting Parental SettingAuto Power OFF Default on Reset to the Default Setting Except for Parental Setting Troubleshooting GuideInformation Specifications Language CodeConexiones Ajuste del reloj Instalación de las pilas del control remotoConmutación VCR/DVD Activación de la unidad por primera vezReproducción de la Grabadora de vídeoReproducción de DVD/CD Control remotoVCR/DVD Switching Clock SettingQuick Use Guide ConnectionsDVD/CD Playback VCR PlaybackTurn on the TV Insert a cassette