FUNAI DV220TT8 owner manual Satellite Link, Copying a Cassette Tape

Satellite Link

You can set the unit to start recording whenever it detects a video signal from the external tuner.

VCR

Preparing for the Satellite Link Timer Recording:

Preparation on the tuner

•Satellite link accepts only the connection from L1 (rear) with the external tuner. (The connection from L2 cannot read any signals from the cable/satellite box.)

•The external tuner should be equipped with some kind of timer function. Using timer function of the tuner, set it to output audio/video signals when it comes to the time you want to start recording, and stop output audio/video signals when it comes to the time you want to finish recording. Refer to the tuner’s manual on how to set the timer.

•Make sure to turn off the tuner when you finish setting.

VCR

1	Press [SPEED] to select the desired tape speed.
	SPEED	Tape speed	Recording / playback time
		Type of tape	T60	T120	T160
	SP	SP mode	1hour	2hours	2-2/3hours
		SLP mode	3hours	6hours	8hours
2	In stop mode, press [SETUP].
		SETUP

Preparation on this unit

				L1
				external tuner
	DVD		DVD/VCR	VCR
DIGITAL	AUDIO	S-VIDEO	AUDIO OUT
AUDIO OUT	OUT	OUT	L
		Y
	L	C /		AUDIO IN
			R
COAXIAL		P
	R		VIDEO OUT	VIDEO IN

C /

P

RCA audio/video cables

5	Set the desired start minutes.	SATELLITE LINK
	If you wish to go back to the left, press [s].
		0 1	: 0 0	PM
	or
6	Press [B] to set satellite link standby mode.	SATELLITE LINK
		0 1	: 3 0	PM
			[ON]

FUNCTIONS

3	Select “SATELLITE LINK”.	TIMER PROGRAMMING
		- M E N U -
	Then press [B] to go to next step.	B SATELLITE LINK
		AUTO REPEAT	[OFF]
		CLOCK SET
	or	LANGUAGE SELECT
4	Set the desired start hour.	SATELLITE LINK
	Then press [B] to go to next step.
		1 2 : 0 0	AM

or

•The hour can be selected from 1-12 with AM or PM.

•When the external tuner signal is stopped, recording will be stopped.

• indicator on this unit lights up and the unit goes to the DVD mode. If you do not use DVD function, turn off the unit.

•Satellite unit must be turned on for VCR satellite link to start.

If cable/satellite box is not set to output signals, satellite link will remain in standby mode.

To cancel the satellite link function in standby mode:

Press [T-SET]on the remote control or [STOP/EJECT C A] on this unit.

To cancel the satellite link function while the satellite link recording is in progress:

Press [STOP/EJECT C A] on this unit.

Note:

•If you have not set the clock, “CLOCK SET” menu will appear at step 2. Refer to “Clock Setting” on page 8.

•You cannot set the ending time for the satellite link timer recording on this unit.

•Recording picture will be distorted if the copy protection signal is being detected during satellite link timer recording.

•When a regular timer recording and the satellite link timer recording are overlapped, those recordings are recorded as illustrated below.

e.g.) In case of the satellite link timer recording is overlapped	e.g.) In case of the timer recording is programmed in the middle	e.g.) In case of the timer recording is overlapped on the existing
on the existing timer recording.	of the satellite link timer recording	satellite link timer recording.
timer recording	timer recording	timer recording
satellite link	satellite link	satellite link
recording result	recording result	recording result

Copying a Cassette Tape

Warning: Unauthorized recordings of copyrighted cassette tapes may be an infringement of copyright laws.

1)Insert a pre-recorded cassette tape into another external device for playback.

2)Insert a recordable cassette tape into this unit for recording.

3)Press [SPEED] on the remote control to select recording speed (SP or SLP).

4)Press [INPUT SELECT] on the remote control to select L1 or L2. Choose L1 if device is connected to rear input jacks, or L2 if connected to the front. Refer to “Front & Rear Terminals” on page 9 for more details.

5)Press [REC/OTR] on the unit.

6)Press “PLAY” button on the external device.

7)To stop recording, press [STOP/EJECT C A] on this unit, then stop playback of the external device.

output jacks of			rear of the unit
external device	L1
AUDIO OUT	RCA audio/video
or		L	VCR
L		DVD/VCR
		AUDIO OUT
R	cables		AUDIO IN
VIDEO OUT		VIDEO OUT	VIDEO IN
		R

You can use a video disc player, cable/satellite box or other audio/video component with audio/video output jacks.

Note:

•For best results during dubbing, use buttons on this unit whenever possible. The remote control might affect another device’s operation.

•Always use video-quality shielded cables with RCA-type connectors. Standard audio cables are not recommended.

•L2 input jacks are on the front of this unit.

– 14 –

EN