B DISPLAY Setting
You can change the display functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 20.
4 Select the desired item. | ||
|
| or |
DISPLAY menu | ||
SETUP | DISPLAY | |
TV ASPECT |
| 4:3 LETTER BOX |
STILL MODE |
| AUTO |
PROGRESSIVE | OFF | |
Note:
5
TV ASPECT: | QUICK |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
(Default: 4:3 LETTER BOX) |
|
|
|
|
| Select the | |||||||||||||
See note on the right. |
|
|
|
|
| desired | |||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| setting. | ||
| TV ASPECT | 4:3 LETTER BOX |
|
|
|
|
| TV ASPECT |
|
|
|
|
|
| ENTER | ||||
| STILL MODE | AUTO |
| 4:3 LETTER BOX |
|
|
|
|
|
|
| ||||||||
|
| 4:3 PAN & SCAN |
|
|
|
|
|
|
| ||||||||||
| PROGRESSIVE | OFF | ENTER |
|
| 16:9 WIDE |
|
|
|
| or | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
| |||||||||
STILL MODE: |
|
|
|
|
|
|
|
| |||||||||||
(Default: AUTO) |
|
|
|
|
| Select the | |||||||||||||
See note on the right. |
|
|
|
|
| desired | |||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| setting. | ||
| TV ASPECT | 4:3 LETTER BOX | STILL MODE |
|
|
|
|
|
| ENTER | |||||||||
| AUTO |
|
|
|
|
|
| ||||||||||||
| STILL MODE | AUTO |
|
|
|
| FIELD |
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
| ||||||||||
| PROGRESSIVE | OFF |
|
|
|
|
|
|
| ||||||||||
| FRAME |
|
|
|
| or | |||||||||||||
|
|
|
|
|
| ENTER |
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6 To exit “TV ASPECT” or “STILL MODE” menu
SETUP
To complete “PROGRESSIVE” setting
ENTER
Note:
TV ASPECT:
• Select “4:3 LETTER BOX”, so |
that black bars may appear |
on the top and bottom of the |
TV screen. |
• Select “4:3 PAN & SCAN” for a |
PROGRESSIVE:
• You can set “PROGRESSIVE” to |
“OFF” in “DISPLAY” menu or |
press and hold [PLAY B] on this |
unit for more than 5 seconds |
during playback until the PRO- |
GRESSIVE SCAN indicator on this |
unit turns off. |
• When “PROGRESSIVE” is “ON”, |
video signals from the unit’s |
PROGRESSIVE: QUICK
(Default: OFF)
See note on the left.
TV ASPECT | 4:3 LETTER BOX |
| 4:3 LETTER BOX |
STILL MODE | AUTO |
| AUTO |
PROGRESSIVE | OFF |
| ON |
ENTER
SETUP
full height picture with both |
sides adjusted. |
• Select “16:9 WIDE” if a wide- |
screen TV is |
connected to this unit. |
STILL MODE:
• Select “AUTO” usually. |
• If you select “AUTO”, it |
automatically selects the |
best resolution setting |
(“FRAME” or “FIELD”) based |
VIDEO OUT and |
jacks will be distorted or not be |
output at all. |
Note:
•In “QUICK” menu, “PLAYER MENU”, “TV ASPECT”, “PROGRESSIVE” or “DOLBY DIGITAL” are available. “QUICK” menu consists of the setting menu frequently used, and they are accompanied with QUICK . You can make all settings in “CUSTOM” menu.
If there is no picture or you do not press any buttons for 15 seconds, “PROGRES- SIVE” will switch to “OFF” and it will exit the “SETUP” menu.
Before proceeding…
1.Make sure your TV has progressive scan.
2.Connect with component video cable
NOTE: If there is no picture or picture is distorted after selecting ‘YES’,
wait about 15 seconds for auto recovery.
Activate Progressive? | NO | |
|
| YES |
SELECT: K / L | SET:ENTER |
|
Confirm again to use progressive scan. If Picture is good, select ‘YES’.
NO
YES
SELECT: K / L SET:ENTER
Select “Yes”.
or
ENTER
Select “Yes”.
or
on the data characteristics of |
the pictures. (default) |
• If you select “FIELD”, the |
picture in the still mode will |
be stabilized. |
• If you select “FRAME”, the |
picture in the still mode will |
be highly defined. |
• An individual picture on |
the TV screen is called a |
“frame”, which consists of |
two separate images called |
as “field”. |
• Some pictures may be |
blurred if you select “AUTO” |
in the still mode due to their |
data characteristics. |
FUNCTIONS
C AUDIO Setting
Choose the appropriate audio setting for your device. It only affects during the playback of DVD discs. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 20.
DVD
4 Select the desired item. | ||
| or |
|
AUDIO menu |
| |
SETUP | AUDIO | |
DRC |
| ON |
DOWN SAMPLING | ON | |
DOLBY DIGITAL | BITSTREAM | |
Note:
•In “QUICK” menu, “PLAYER MENU”, “TV ASPECT”, “PROGRESSIVE” or “DOLBY DIGITAL” are available. “QUICK” menu consists of the setting menu frequently used, and they are accompanied with QUICK . You can make all settings in “CUSTOM” menu.
5
DRC (Dynamic Range Control):
(Default: ON)
Set to “ON” to compress the range between soft and loud sounds.
|
|
|
|
|
|
|
DRC | ON |
|
|
| OFF | |
|
|
|
|
| ||
DOWN SAMPLING | ON | ON | ||||
DOLBY DIGITAL | BITSTREAM |
|
| BITSTREAM | ||
ENTER | ||||||
|
|
|
|
|
|
|
DOWN SAMPLING: (Default: ON)
Set to “ON” when outputting in 48kHz.
Set to “OFF” when outputting the original sound.
DRC | ON |
|
| ON |
DOWN SAMPLING | ON |
|
| OFF |
| ||||
DOLBY DIGITAL | BITSTREAM |
|
| BITSTREAM |
ENTER | ||||
|
|
|
|
|
DOLBY DIGITAL: QUICK
(Default: BITSTREAM)
Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder.
•BITSTREAM: outputs Dolby Digital signals.
•PCM: converts the Dolby Digital into PCM (2 channel).
DRC | ON |
| ON |
DOWN SAMPLING | ON |
| ON |
DOLBY DIGITAL | BITSTREAM |
| PCM |
ENTER
6 To exit the menu
SETUP
Note:
DRC:
•This function is available only on the discs which are recorded in the Dolby Digital format.
DOWN SAMPLING:
•When playing back a 96kHz disc with the copyright protection, or when virtual surround is set to “1” or “2”, the sound will be down sampled at 48kHz even if the “DOWN SAMPLING” is set to “OFF”.
•This function is available only on digital outputting of a disc recorded in 96kHz.
– 21 –
EN