C O N N E C T I O N S
Follow these steps to connect the DVD+VCR to your television and antenna/cable TV.
From Antenna or Cable TV
To Television | To Line Inputs on |
| your Television |
| (Optional) |
B A S I C
N O T E S
1C O N N E C T A N T E N N A / C A B L E T V
Connect the RF coaxial cable from your indoor/outdoor antenna or cable wall outlet to the IN (FROM ANT.) jack on the back panel of the DVD+VCR.
2C O N N E C T D V D + V C R T O T V
R F C o n n e c t i o n
Connect the supplied RF coaxial cable from the “OUT (TO TV)” jack on the DVD+VCR back panel to your television’s antenna in jack. Use this connection if your television is equipped with a basic antenna input.
OR
L i n e C o n n e c t i o n
Connect the supplied stereo A/V cable from the “Line Out” jacks on the DVD+VCR back panel to your television’s Line In jacks. Be sure to match yellow to video, red to right audio and white to left audio on your television and DVD+VCR. Use this connection for better sound and picture quality if your television is equipped with line inputs.
3SET DVD+VCR OUTPUT CHANNEL
If you used the RF connection in Step 2, set the CH (Channel) switch on the back panel of the DVD+VCR to 3 or 4, whichever is not an active channel in your area. If you used the Line Connec- tion, skip to Step 4.
4P L U G I N D V D + V C R
Connect the DVD+VCR power cord to a standard 120V/60Hz wall outlet.
5T U R N O N T V A N D D V D + V C R
Turn on your television, and press POWER on your DVD+VCR.
6 S E T T V T O C H A N N E L 3 , 4 ,
O R L I N E
Set your TV to the same channel you selected in Step 3. If you used the Line Connection, set your TV to its Line input.
•The “Language/Langue/Idioma” menu should appear on the screen.
•Please proceed with Auto Setup on the following page.
•For Advanced Connections, please refer to Appendix A.
•Even if you plan to use the
2
DVD+VCR User’s Guide