FUNAI WV20V6 owner manual Hints for Timer Recording, Priority of overlapped settings, 32 EN

Page 32

Recording

Timer Recording (cont’d)

Hints for Timer Recording

•If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost.

•If a recordable disc is not on the tray or an unrecordable disc is on the tray, “DVD REC indicator” on the front panel flashes and Timer Recording cannot be performed. In some cases, “DVD REC indicator” flashes momentarily around the Timer starting time as the unit attempts to record. Please insert a recordable disc.

•If a videotape with a record tab is not in the cassette compartment or there is no videotape in the compartment, “VCR REC indicator” on the front panel flashes and timer recording cannot be performed. Please insert a recordable videotape.

•If you press [STANDBY-ON]and turn on the unit while either DVD or VCR is in timer standby mode. In this case, you cannot change the mode between DVD and VCR. You cannot change any settings using [SETUP] and output or edit discs.

•After step 9 on page 30, you can turn on the power to use the side of the unit that is free from Timer Recording (either DVD or VCR) for another recording by pressing [STANDBY-ON]during timer standby. During Timer Recording, press [SELECT]

on the front panel, or [DVD ] or [VCR ] on the remote control. Note that you cannot change channels after Timer Recording started. You can use all recording/recording pause/the One-touch Timer Recording functions. However, the unit will begin receiving channel signals for Timer Recording 2 minutes before the programmed starting time. Unless the program that you are currently recording using the Timer Recording free side of the unit is on the same channel with the one programmed for Timer Recording, the unit prioritizes Timer Recording and the current recording will be automatically stopped. If the channels set for Timer recording and the current recording are same, the current recording will continue without interruption.

•When all the Timer Recording is completed, TIMER REC indicator flashes. To play or eject the recorded disc, press [STANDBY-ON]first, and then press [PLAY B] or [OPEN/CLOSE A].

•If both DVD and VCR are timer programmed, you cannot use any functions for either unit during timer standby or Timer Recording. If you want to use functions other than recording under such condition, cancel Timer Recording by pressing [TIMER SET] during timer standby or stop recording by pressing [STOP C] on the front panel during Timer Recording.

•When the starting and ending time are same, the recording will be set for 24 hours. When the disc or tape reaches the end during the recording, the unit turns itself off. If you want to continue the recording, cancel timer standby by pressing [TIMER SET], insert a new disc or tape, and then press [TIMER SET] again. If you are recording on a tape, the unit automatically ejects the tape when it reaches the end. You can continue the recording by inserting a new tape.

•When the programmed starting and ending time are earlier than the current time, the setting will not be accepted and be cleared for redoing.

•If the starting time is earlier and the ending time is later than the current time, the recording will start right after you press [TIMER SET].

•The Timer Recording cannot be performed in DVD and VCR at the same time. If you set two programming with the same channel and time in both units, the program with a lower program number will be recorded.

The priority of overlapped settings

This unit records the programs according to priority if the timer programmings are overlapped. The timer programming set previously has priority.

A Timer Recording of lower priority will be canceled, start from the middle or stop on the way. Check the overlapped timer programmings and change the priority if necessary.

A programming set previously has priority

When the starting time is the same:

A program set previously (PROG. A) has priority.

PROG. A

 

 

PROG. B

 

 

Actual

PROG. A

PROG. B

recording

 

 

The first 30 seconds (at the longest) will be cut off.

When some programming have been made at the end time of the programming currently being recorded:

A program set previously (PROG. B) has priority.

PROG. A

 

 

PROG. B

 

 

PROG. C

 

 

Actual

PROG. A

PROG. B

recording

 

 

The first 30 seconds (at the longest) will be cut off.

When the recording time is partially overlapped: PROG. A will start after PROG. B is complete to be recorded.

PROG. A

PROG. B

 

 

 

 

Actual

 

 

 

 

recording

 

PROG.B

 

PROG.A

The first 30 seconds (at the longest) will be cut off.

When the recording time is entirely overlapped: PROG.A will not be recorded.

PROG. A

 

PROG. B

 

Actual

PROG. B

recording

 

Note for DVD recording

•When the recording time of two programs are overlapped, or the End time of a program and the Start time of another is the same, the first 30 seconds (at the longest) of the subsequent program will be cut off.

•If the cut-off portion comes up to one minute or more, this program will be displayed with error number E40 in the timer programming list.

When the End time of the programming currently being recorded and the Start time of the subsequent program are same:

If PROG. A is a DVD recording program, the beginning of the PROG. B may be cut off.

PROG. A

 

 

PROG. B

 

 

Actual

PROG. A

PROG. B

recording

 

 

The first 30 seconds (at the longest) will be cut off.

32 EN

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Changing the Setup menu VCR functions Others Español Before you start Connections Getting startedPlaying DiscsPrecautions Laser SafetyBefore you start Make your contribution to the environmentPrecautions cont’d Before youInstallation Location Avoid the Hazards of Electrical Shock and FireMoisture Condensation Warning About CopyrightMaintenance With an AM radioLight appears through digital camera, the remote is working Dolby Digital RecordingTable of contents Start Connections FeaturesSymbol Description Front Panel Indicator Guide Functional overviewChanging the Setup menu Functional overview cont’dRear Panel You start10 EN Remote ControlFunctional overview cont’d Installing batteries in the remote control Using a remote controlVCR/DVD recorder switching Either side of the center approx feet 5m withinSetup menus Changing the Playing discs Editing Setup menu Display menuStart Connections Getting started Recording VCR functions Others EspañolPlug in the AC power cord of this unit ConnectionsConnection to a TV 14 ENConnection to a TV cont’d Connection to a cable box or satellite boxConnection to an Audio System 16 ENAudio OUT Digital Audio OUTInstructions continue on the next page. EN Getting startedEasy DVD recording Easy DVD recording cont’d Select Record Desired On DVD Channel DiscInitial setting 20 EN Channel setting cont’dAdding/deleting channels Press Setup Using K / L, select Required Settings. Press OK Using K / L, select Stereo or SAP. Press OKSelecting the TV stereo or SAP SAP Secondary Audio Program Outputs sub-audio22 EN Setting the clockAuto Clock Setting Español Setting the clock cont’dManual Clock Setting Setting the clock cont’d Setting the Daylight Saving TimeSelecting the TV aspect ratio 24 ENRecording mode RecordingInformation on DVD recording InformationInformation on DVD recording cont’d 26 ENSetting for Auto Chapter Using K / L, select on or OFF. Press OKBefore recording Replacing disc menu28 EN Basic recordingDisc tray guide One-touch Timer Recording OTR UsingDVD REC and Stop C First DVD Turn on the unit and load a recordable disc Make sure that the TV input is set on the unit30 EN Timer RecordingSetup Recording Playing discs Editing Timer Recording cont’dStart Connections Getting started 32 EN Hints for Timer RecordingPriority of overlapped settings Overwriting an existing title Overwriting from the beginning of the titleOverwriting in the middle of the title You34 EN Overwriting an existing title cont’dHints for Overwriting Settings for an external source Connection to an external sourceAnother source VCR camcorder etcSettings for an external source cont’d Setting a disc to protectRecording from an external source 36 ENPlaying the discs in other DVD players Finalizing a discDVD-RW only Start38 EN Playing the discs in other DVD players cont’dAuto finalizing Dubbing Mode Using K / L, select DubbingMode. Press OK Option window will appear Make sure40 EN Playing discs Information on DVD playBasic playback Playback42 EN Stop CBasic playback cont’d Playing MP3 discPlaying discs using the disc menu Playing discs using the title menuPause 44 ENSpecial playback Fast forward / Fast reverseSkipping TV commercials during play X40Special playback cont’d Rapid playStep by step playback Slow forward / Slow reverse playMarker Setup ZoomUsing Prev H / Next G Using DisplaySearch Title/Chapter searchWhen inserting Audio CD disc Search cont’dTrack search Time searchRepeat/Random/Program playback Repeat playbackRandom playback 50 ENSwitching subtitles Repeat/Random/Program playback cont’dSelecting the format of audio and video Program playbackSwitching audio soundtrack Switching virtual surround systemSelecting the format of audio and video cont’d 52 ENSwitching camera angles Using / B, selectSelecting the format of audio and video cont’d Reducing block noiseEditing discs Setup menu EditingInformation on disc editing Guide to a title listUsing K / L, select a desired title. Press OK Using K / L, select Edit Press OKUsing K/ L, select Title Delete. Press OK Editing discsUsing K / L, select Edit Title Name. Press OK Editing discs cont’dPutting names on titles 56 ENPrev H / Next G, REW Setting chapter marksBeforeyou Using K / L, select Delete All. Press OK Clearing chapter marks58 EN All chapter marks will be deletedHiding chapters Using K / L, select Current Chapter. Press OKEditing Setup menu Changing Setting pictures for thumbnails Using K / L, select Index Picture. Press OK60 EN Press Return to exitDividing a title You can divide one title into two new titlesNumber of recording chapter Comes up to the maximum 254Editing discs Setup menu When inserting DVD-RW discUsing K / L, select Edit Disc Name. Press OK Putting name on discSetting disc to protect First DVD Editing discs Setup menu cont’dSetting or releasing disc protect Setting or releasing disc protect contd Using K / L, select Disc Protect. Press OK64 EN Releasing disc from protect First DVDUsing K / L, select Erase Using K / L, select Make Edits Compatible. Press OKErasing disc Making edits compatibleChanging the Setup menu Tour of the Setup menuSetup Items highlight is the default Contents 66 ENLanguage setting Changing the Editing Setup menu VCR functions OthersBefore you start Connections Getting Started Recording Playing discsLanguage setting cont’d Display settingPress Stop C if you are playing a disc 68 ENDisplay setting cont’d Audio settingAudio setting cont’d Settings for PCM Default 48kHzSettings for Dolby Digital Default Stream 70 ENVideo setting Progressive Scan Default OFFUsing K / L, select Video. Press OK Using K / L, select Progressive Scan. Press OKSettings for Parental lock level Password has not been set yetPassword has been set already YesSettings for Parental lock level cont’d Settings for PBC Playback ControlPBC Video CD only Default on Press Setup Using K / L, select CD Playback Mode. Press OKRecording and One-touch Timer Recording VCR functionsPlaybackxxxx RecordingRecording and One-touch Timer Recording cont’d One-touch Timer Recording OTRXxxx Search76 EN Searchxxxxcont’dOther operations Troubleshootingxxxx Symptom RemedyOthers Or VCRTroubleshootingxxxx cont’d Symptom78 EN You press OPEN/CLOSE aTroubleshooting cont’d Cause SolutionNot work Before you start Connections Getting started RecordingRF output switch Error message Cause Solution80 EN For more than SecondsGlossaryxxxx Language code82 EN Frequently Asked QuestionsSpecifications Memo 84 ES EspañolFácil grabación de DVD Sugerencia 1 Reproduzca el contenido grabado Sugerencia 2 Edite el disco grabado¿Qué son títulos y capítulos? Finalización de un discoSe hará una pausa de reproducción y se silenciará el sonido Reproducción conxxxxvideograbadora86 ES Grabación y grabación con temporizador de un toque VCR GrabaciónGrabación con temporizador de un toque OTR VIDEO/TVCustomer Service TelLimits and Exclusions Funai CorporationInput Mode Names for Common TV Brands Press STANDBY-ONAfter all recordings, finalize your disc Set the Timer Standby modePress repeatedly to select desired recording time
Top Page Image Contents